Panasonic BK-3MCCA8BA Eneloop AA 2000mAh 2100 Cycle 8 Pack
- 8-pack
- AA Ni-MH
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two 18650 cells deliver 5200 mAh at 3.7 V with an 8 A protection PCB and 7 A polyswitch
This DUSLAN lithium-ion battery pack combines two 18650 cells into a single 3.7 V module rated at 5200 mAh. It targets engineers, hobbyists and repair technicians who need a ready-made pack with integrated protection for portable devices or custom power projects. The assembly is wrapped in PVC shrink with 18 AWG wire leads for direct soldering or connector attachment.
An on-board PCB limits charge voltage to 4.2 V and discharge cut-off to 2.75 V while guarding against over-charge, over-discharge, over-current and short circuits at 8.0 A. A 4.2 A polyswitch adds a secondary current limit and reverse-polarity protection. Maximum charge current is 5 A and maximum discharge current is 7 A, so the pack runs cool and quiet in typical low-to-moderate drain applications.
Under continuous load the polyswitch caps output at 7 A, preventing the cells from exceeding their safe operating area during prolonged use. The 2600 mAh ICR18650 B4 cells maintain stable voltage through the discharge curve without memory effect, and the pack meets UN 38.3 requirements for safe transport. Builders needing higher continuous current or a different form factor should consider alternative configurations.
Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.
| Power | |
|---|---|
| Battery type | Battery Pack |
Solder the 18 AWG leads observing the marked polarity; the 4.2 A polyswitch will open if the pack is connected backwards, preventing damage.
No scheduled maintenance is required; replace the pack when run-time falls below your needs or if the PVC wrap or leads show damage.
The 4.2 A polyswitch limits continuous discharge to 4.2 A, so it will trip before the 8 A PCB or the 7 A rating is reached.
More in Household Batteries & Chargers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?