DURACELL MN1500B10Z AA Alkaline Battery 1.5V 10-pack
- 10-pack
- AA Alkaline
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4.8 V NiMH pack delivers 4200 mAh through 14 AWG leads, measuring 3.6" × 1.9" × .9" and weighing 9.7 oz
This 4.8 volt nickel-metal-hydride pack delivers 4200 mAh capacity and a 30 amp maximum discharge rate, making it suitable for high-drain remote-control vehicles, robotics projects and portable equipment that require sustained current. The four sub-C cells are configured in a compact 3.6 inch by 1.9 inch brick weighing 9.7 ounces.
Pre-attached 14 AWG leads measuring four inches simplify soldering or connector crimping for most hobby applications. Ensure correct polarity before connecting; the bare leads have no keyed plug, so reversed wiring can damage sensitive electronics or the pack itself.
The pack accepts a maximum charging rate of 4.2 amps, so a charger set above that value will overheat the cells and shorten service life. NiMH chemistry also exhibits higher self-discharge than lithium types, meaning the pack loses usable capacity during extended storage unless topped up periodically.
Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.
| Power | |
|---|---|
| Battery type | Battery Pack |
Measure the open-circuit voltage with a multimeter; a healthy NiMH pack should read close to 4.8 V. Then apply a known load and confirm the voltage holds steady without excessive drop, indicating the cells are accepting and delivering charge as expected.
The pack itself is supplied with 4-inch 14 AWG leads attached. You will need to provide a compatible NiMH charger, any connectors or soldering required for your device, and mounting hardware if the 3.6" × 1.9" × 0.9" dimensions need securing in your application.
This model is offered in a single 4200 mAh configuration built from four Sub C NiMH cells. If your device demands longer runtime, you would need to add a second pack in parallel or select a higher-capacity pack from a different product line.
More in Household Batteries & Chargers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?