We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six cylindrical AA NiCd cells with solder tabs, light finish, 14 mm diameter, 49 mm length

DUSLAN

DUSLAN 6-Pack AA NiCd 700 mAh Batteries with Tabs

SKU CH-K8MZ-D09WS

Six AA NiCd cells at 700 mAh and 1.2 V with solder tabs, recharging up to 500 cycles for high-drain devices

  • Battery typeAA
  • Six batteries keep multiple devices powered longer
  • 700 mAh capacity supports extended run-time per charge
  • NiCd chemistry handles high-drain loads reliably
  • Tab terminals allow direct soldering to custom packs
  • Rechargeable up to 500 cycles reduces replacement cost

Six-Cell AA NiCd Pack with Solder Tabs

This pack contains six AA nickel-cadmium cells rated at 700 mAh and 1.2 volts each. The cells arrive with welded tabs for direct soldering into custom battery packs or replacement assemblies. They suit hobbyists, repair technicians and legacy equipment that requires tabbed NiCd chemistry. Each cell measures 49 mm long by 14 mm wide and weighs 19 grams.

Thermal Behaviour and Power Delivery

Nickel-cadmium chemistry tolerates high discharge rates without excessive heat buildup during normal operation. The cells accept recharge currents that restore full capacity over hundreds of cycles. Self-discharge is moderate compared with modern low-self-discharge alternatives, so stored packs should be topped up before critical use. No forced-air cooling or special thermal management is required for typical loads.

Tabbed Terminals for Permanent Installation

The defining specification is the welded tab terminal, which replaces the standard button top and enables direct PCB soldering or wire attachment. This makes the cells incompatible with devices that rely on spring contacts or snap-in battery holders. Buyers who need drop-in AA cells for consumer electronics should choose standard button-top versions instead.

How it compares

Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.

Price $18.99
Pricier than about 75% of the 10,440 comparable items (median $10.99).

Specifications

Power
Battery typeAA

Questions about this item

How are the tab terminals on these DUSLAN AA NiCd batteries soldered into a battery pack, and what mistake damages the cells?

Solder quickly to the tabs using a temperature-controlled iron; excessive heat on the 14 mm diameter cells degrades the NiCd chemistry and reduces the 500-cycle service life.

When do these 700 mAh NiCd cells need replacement, and what maintenance extends their runtime?

Replace the pack after roughly 500 recharge cycles or when capacity drops below usable levels; periodic full discharge cycles help mitigate memory effect and maintain the 1.2 Volt output.

What is the first limitation that appears when these 700 mAh AA batteries are used in sustained high-discharge devices?

The 700 mAh capacity depletes quickly under continuous high current, so runtime becomes the limiting factor before the NiCd chemistry reaches its thermal or cycle limits.

More in Household Batteries & Chargers

Similar items