DURACELL MN1500B10Z AA Alkaline Battery 1.5V 10-pack
- 10-pack
- AA Alkaline
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 7.4 V 5200 mAh lithium-ion pack built from four Samsung 18650 cells with over-charge, over-discharge and short-circuit protection
This DUSLAN battery pack supplies 5200 mAh at a nominal 7.2 V using four Samsung 18650 cells. An integrated protection IC guards against over-charge, over-discharge, over-current and short circuits, while a 2 A polyswitch adds a hard discharge limit and reverse-polarity protection. The module is PVC-wrapped and terminated with 18 G leads for direct soldering.
At 76.2 mm long, 18 mm wide and 69 mm high the pack slides into narrow RC airframes, car tubs or robot frames. Its 199 g mass is lighter than equivalent NiMH packs, leaving more payload margin for airframes or improving acceleration on ground vehicles. No separate balance connector is fitted, so the builder must plan charging through the main leads or add a custom tap.
Builders comfortable with 2 A charge and discharge limits and a 5.5 V cut-off will benefit from the high energy density and long storage life. The pack is not suited to applications that demand sustained currents above 2 A, fast-charge rates beyond 2 A, or users without Li-Ion handling knowledge. UN 38.3 certification covers transport only, not operational safety.
Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.
| Power | |
|---|---|
| Battery type | Battery Pack |
The polyswitch limits continuous discharge to 2 A and will cut off if current exceeds that value, so runtime at the maximum allowed draw is about 2.6 hours.
The protection IC and 2 A polyswitch are rated for the pack's maximum discharge current; they operate within spec at 2 A and do not produce excessive heat under normal conditions.
A charger that delivers 8.4 V peak (7.2 V nominal) with a 2 A maximum current is needed; the pack ships with 18 AWG leads for soldering or connector attachment.
More in Household Batteries & Chargers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?