Panasonic BK-3MCCA8BA Eneloop AA 2000mAh 2100 Cycle 8 Pack
- 8-pack
- AA Ni-MH
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Eight 18500 LiFePO4 cells at 3.2 V and 800 mAh replace 600–1000 mAh packs with up to 2000 cycles
This eight-pack supplies 18500 cells with a nominal 3.2 V and 800 mAh capacity using lithium iron phosphate chemistry. Each cell measures 50 mm long by 18.1 mm in diameter and weighs 31.2 g. The pack suits equipment designed for the 18500 form factor that requires stable voltage and long cycle life.
The lithium phosphate chemistry delivers a fixed 3.2 V nominal output rather than the higher voltage of lithium-ion alternatives, so devices must accept this lower potential. Continuous charge and discharge currents are capped at 0.8 A per cell, restricting use to low-drain applications. Energy density reaches 82.05 Wh/kg, and the cells tolerate up to 2000 charge cycles with no memory effect.
These 800 mAh cells substitute for 1000 mAh, 900 mAh, 850 mAh, 750 mAh and 600 mAh variants in the same 18500 size. The trade-off is lower single-charge runtime in exchange for up to 2000 cycles and a stable 3.2 V profile. The jump is worthwhile for gear that prioritises longevity and consistent voltage over maximum capacity per charge.
Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.
No published specifications for this item yet.
These cells are rated at 800 mAh and are listed as replacements for 600 mAh, 750 mAh, 850 mAh, 900 mAh and 1000 mAh versions, so they fit the same 18500 slot across that range.
The 800 mAh capacity sets the total charge the cell can hold; combined with the 3.2 V nominal voltage it determines how long your device runs before needing a recharge, while the 0.8 A max discharge current limits the peak load it can support.
The chemistry is LiFePO4 with a maximum charging current of 0.8 A, so any compatible charger must not exceed that rate for these 18500 cells.
More in Household Batteries & Chargers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?