DUSLAN C LS26500 ER26500 3.6V 9000mAh Lithium Battery with Tabs

DUSLAN C 9000mAh 3.6V Primary Lithium Battery

The DUSLAN C LS26500 ER26500 is a primary lithium thionyl chloride cell delivering 3.6 volts and 9000mAh capacity. It features spot-welded tabs on each end for direct soldering into equipment. The hermetic glass-to-metal seal and non-flammable electrolyte ensure safe operation across a wide temperature range from -55°C to +85°C. It holds UL approval under reference MH30127.

Suits long-life remote sensors and backup circuits

This cell suits metering systems, alarms, GPS beacons, radio communication gear and military equipment needing up to ten years of standby power with less than one percent annual self-discharge. Continuous current is limited to 200mA and pulse current to 400mA, so it cannot drive high-drain motors or transmitters requiring sustained amperage. Buyers needing rechargeable chemistry or higher continuous current should look elsewhere.

Spot-welded tabs enable direct PCB mounting

The pre-attached tabs remove the need for separate battery holders or spring contacts, reducing assembly height and improving vibration resistance in portable or vehicle-mounted devices. No charger, programming cable or configuration software is included because the chemistry is non-rechargeable and application-specific. The tabs are the only accessory supplied.