We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

DUSLAN

DUSLAN HW8471030-A 3.6V 1200mAh Lithium Battery

SKU CH-KYKT-16BQ8

3.6 V lithium cell with 1200 mAh capacity, wire-lead connector and -60 °C to +85 °C operating range for Yaskawa Motoman PLC packs

  • Battery typeHW8471030-A
  • 6 V output powers PLC memory modules reliably
  • 1200 mAh capacity sustains long backup intervals
  • 60 °C to +85 °C range suits harsh industrial sites
  • 15 mm × 26 mm form factor fits standard battery slots
  • Wire-lead connector enables direct drop-in replacement

Direct Yaskawa Motoman replacement

The DUSLAN HW8471030-A is a 3.6V lithium cell rated at 1200 mAh with wire leads and a connector. It matches the Yaskawa Motoman HW8471030-A and 479348-2 part numbers for direct installation in supported PLC battery packs.

Upgrades legacy primary cells

This lithium chemistry replaces older non-rechargeable cells in the same form factor, providing stable voltage across the -60°C to +85°C operating range. The change is worth it when equipment demands reliable memory backup through wide temperature swings.

Verify connector and pack layout

Confirm the existing pack uses a 15 mm diameter by 26 mm length cell with the same wire-lead termination. Check that the keyed connector orientation matches the original HW8471030-A before ordering.

How it compares

Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.

Price $14.99
Pricier than about 67% of the 10,440 comparable items (median $10.99).

Specifications

Power
Battery typeHW8471030-A

Questions about this item

What are the exact diameter and length so I can confirm it fits my Yaskawa Motoman HW8471030-A battery pack?

The cell measures 15 mm in diameter and 26 mm in length, matching the original HW8471030-A pack dimensions.

How do I connect the wire leads with connector during installation, and what is the common mistake?

Align the connector keying with the pack header and press straight in; the frequent error is forcing it reversed, which bends the pins.

When should I plan to replace this 3.6V 1200mAh lithium cell in my PLC?

Replace when the controller reports low-voltage alarms or the pack voltage sags noticeably under load after extended service.

More in Household Batteries & Chargers

Similar items