We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve Sub C NiCd cells with solder tabs, 1.2 V 1500 mAh, 43 mm by 22 mm

DUSLAN

DUSLAN Sub C NiCd 1500 mAh 12-Pack with Tabs

SKU CH-F7Q0-Z1MED

A 12-pack of Sub C NiCd cells delivering 1500 mAh at 1.2 V with solder tabs for high-discharge applications and up to 500 recharge cycles

  • 12-pack keeps spares ready for high-drain devices
  • 1500 mAh capacity powers tools through long sessions
  • NiCd chemistry handles rapid discharge without damage
  • Pre-welded tabs on both ends simplify pack assembly
  • Rated for up to 500 recharge cycles for extended use

Sub C NiCd 1500 mAh 12-Pack

These nickel-cadmium cells deliver 1.2 volts and 1500 mAh each in the Sub C form factor. They arrive with solder tabs on both ends for direct integration into custom packs. The chemistry suits high-discharge tools, emergency lighting and RC applications. A full set contains twelve cells for multi-cell assemblies.

Solder-tab installation notes

Tabs allow series or parallel connections without spring contacts, but they require a temperature-controlled iron and flux to avoid overheating the seal. Excess heat can vent electrolyte or weaken the tab weld. Cells must be spot-welded or soldered quickly; never force tabs into holders designed for button tops. Polarity marking is on the wrapper — verify before applying heat.

NiCd practical limits

The 1500 mAh capacity is modest compared to modern chemistries, so run times are shorter in high-drain devices. Memory effect appears if cells are repeatedly recharged before full discharge; periodic deep cycles mitigate this. Rated cycle life reaches 500 charges under controlled conditions. Self-discharge is higher than NiMH or lithium alternatives, so stored packs lose charge within weeks. Cadmium content requires regulated recycling at end of life.

How it compares

Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.

Price $24.99
Pricier than about 82% of the 10,440 comparable items (median $10.99).

Specifications

No published specifications for this item yet.

Questions about this item

How can I verify the 1.2 V cells are working after soldering the tabs into my pack?

After assembly, measure each cell with a multimeter; a healthy Sub C NiCd should read around 1.2 V. Under load the voltage will dip slightly, then recover when the load is removed.

What comes in the box and what extra items are needed to use these batteries?

The pack contains twelve Sub C cells with tabs on both ends. You will need a NiCd-compatible charger and, if building a pack, solder, heat-shrink tubing and a spot welder or soldering iron.

Should I choose the 1500 mAh Sub C size or a different capacity for high-drain tools?

The 1500 mAh Sub C cells are rated for high discharge and up to 500 recharge cycles, making them suitable for power tools and RC packs that demand strong current delivery.

More in Household Batteries & Chargers

Similar items