DURACELL MN1500B10Z AA Alkaline Battery 1.5V 10-pack
- 10-pack
- AA Alkaline
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Six Sub C NiMH cells with solder tabs deliver 4200 mAh at 1.2 V and recharge up to 1000 cycles
This six-pack supplies 4200 mAh Sub C nickel-metal-hydride cells with tabs on both ends for soldered assemblies. Each cell delivers 1.2 V and measures 43 mm by 23 mm. The chemistry avoids memory effect so partial recharges do not reduce usable capacity. Hobbyists and technicians building custom packs for RC, lighting or portable equipment will find the format convenient.
Rated for up to 1000 recharge cycles, the cells maintain reliable service life under repeated deep-drain use. NiMH chemistry provides steady voltage through the majority of the discharge curve rather than a sharp drop-off. Tabs on both ends keep internal resistance low in series strings, helping the pack deliver consistent current during extended runs. The absence of memory effect means the full 4200 mAh remains available after many partial cycles.
Nominal voltage sits at 1.2 V per cell, so series strings produce lower pack voltages than lithium alternatives of the same count. Self-discharge is higher than low-self-discharge NiMH variants, requiring a top-up charge after weeks of storage. Charging must follow NiMH termination methods such as negative delta-V or temperature cut-off to avoid overcharge damage. The 43 mm length and 23 mm diameter fix the physical envelope for any holder or shrink-wrapped bundle.
Measured against everything we stock in Household Batteries & Chargers, at today’s prices. Recalculated every night.
No published specifications for this item yet.
NiMH chemistry runs cool under normal loads; the 1.2 V cells warm slightly at high current but do not require active cooling in typical pack assemblies.
You need a NiMH charger that accepts Sub C cells with solder tabs or a spot-welder to build packs; the tabs are not compatible with standard spring-loaded AA/AAA chargers.
Yes, both share the same 1.2 V nominal voltage and Sub C form factor, but avoid mixing chemistries in series strings to prevent imbalance during discharge.
More in Household Batteries & Chargers
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?