We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Stainless steel electronic ball valve with actuator housing and manual override lever

Dynaquip Controls

Dynaquip Controls 191014B 316 Stainless Steel Electronic Ball Valve Trap 115V AC IP66 2.5s

SKU CH-2VD8-EBHSM MPN 191014B

Electrically actuated two-way ball valve with 316 stainless steel ball, PTFE seats, 115V AC power, IP66 rating, and 2.5 second cycle time

  • Product typeDrain Components
  • Main materialHAWA
  • Product colorTransparent
  • 316 stainless steel ball resists corrosion in harsh fluids
  • IP66 enclosure protects actuator against dust and powerful water jets
  • 5 second cycle time enables rapid open-close response
  • 115 V AC supply fits standard industrial power circuits
  • Manual override and position indicator allow local control and status check

What this valve is

This Dynaquip Controls 191014B is an electrically actuated two-way ball valve with a 316 stainless steel ball. It operates on 115V AC power, carries an IP66 rating, and completes a 90-degree cycle in 2.5 seconds. The straight two-piece body uses PTFE and RPTFE seats with PTFE and FKM seals. A manual override, position indicator, and thermal overload protection are built into the actuator.

Who this suits

Installers needing a quarter-turn drain component rated for 1,000 psi operating pressure and a fail-last position will find the specifications match. The 3/4 inch FNPT connection and 115V AC supply requirement suit industrial plumbing and process lines. Buyers who need a different voltage, a fail-safe spring-return action, or a larger nominal size should look at other models.

What to check before ordering

Confirm that the pipeline uses a 3/4 inch FNPT thread and that the system pressure does not exceed 1,000 psi. Verify that 115V AC power is available at the mounting location and that the IP66 enclosure rating meets the environmental conditions. Ensure the 2.5-second cycle time and 90-degree rotation meet the control sequence timing.

How it compares

Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.

Price $460.99
Pricier than about 90% of the 4,240 comparable items (median $31.99).

Specifications

Product
Brand nameDynaquip Controls
Model name191014B
Product typeDrain Components
Product colorTransparent
Size & build
Main materialHAWA

Questions about this item

What pipe thread must my plumbing already have to connect the 3/4" FNPT valve?

Your piping needs a 3/4-inch female NPT thread to mate with the valve’s FNPT connection.

Will the 115 V AC actuator work with my existing 115 V control panel?

Yes, the actuator is rated for 115 V AC and draws power directly from a standard 115 V supply.

How do I confirm the valve has completed its 90-degree stroke after installation?

The built-in position indicator shows the open or closed state once the 2.5-second cycle finishes.

More in Drain Stoppers, Strainers & Traps

Similar items