Dynaquip Controls PVS25AJS034A 1" FNPT Stainless Steel Pneumatic Ball Valve Trap
Pneumatically actuated stainless-steel ball valve with 115 V AC pilot solenoid, full-port design and 1,000 psi operating pressure
- Product typeDrain Components
- Main materialHAWA
- Pneumatically actuated for automated flow control
- 316 stainless steel ball resists corrosion
- Full-port design maintains unrestricted flow
- 1 000 psi operating pressure handles demanding systems
- 115 V AC pilot solenoid enables direct electrical control
Pneumatic ball valve for automated shut-off
This pneumatically actuated two-way ball valve uses an air-to-spring mechanism with a normally closed fail-safe position. A 115V AC pilot solenoid is included for direct electrical control. The full-port design maintains unrestricted flow through the 1-inch FNPT stainless steel body.
Verify pressure, voltage
Confirm the system operating pressure does not exceed 1,000 psi and steam pressure stays within 150 psi. Ensure a clean, dry compressed-air supply is available for the actuator and that control wiring can deliver 115V AC to the solenoid. The valve requires a female NPT thread on both ports for installation.
Integrates into stainless steel piping systems
The 316 stainless steel body and ball resist corrosion in aggressive fluid lines, while the straight body style simplifies in-line mounting. The fail-closed function protects downstream equipment during air or power loss, and the full-port bore avoids flow restriction in high-capacity circuits.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $498.99
- Pricier than about 90% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Dynaquip Controls |
| Model name | PVS25AJS034A |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
Does the valve include the 115V AC pilot solenoid or must it be purchased separately?
The 115V AC pilot solenoid is included with the pneumatically actuated two-way ball valve.
How do I decide between air-to-spring and other actuator operations for this model?
This model uses air-to-spring operation with a normally closed deactivated state and fail-closed fail-safe position.
What does the 1,000 psi maximum operating pressure mean for my compressed air system?
The valve is rated for up to 1,000 psi maximum operating pressure and 150 psi maximum steam pressure.
More in Drain Stoppers, Strainers & Traps
Similar items
BELL AND GOSSETT PL-36 trap 1/6 hp 115V
- Drain Components
- Cast Iron
Banjo RB300-150 3 inch MNPT x 1-1/2 inch FNPT Reducing Bushing Schedule 80 trap
HAYWARD POOL PRODUCTS INC SV20050STV 120VAC CPVC Solenoid Valve Trap
- Drain Components
- CPVC





