Dynaquip Controls VLE2.AK 1" FNPT Carbon Steel Ball Valve trap
Inline carbon-steel ball valve handles water up to 3,000 psi and steam to 150 psi with a 29 in Hg vacuum rating
- Product typeDrain Components
- Main materialHAWA
- Carbon steel body resists corrosion in water systems
- Full-port design maintains unrestricted flow through the valve
- Rated for 3,000 psi operating pressure in demanding applications
- Withstands 150 psi steam service for high-temperature lines
- Vacuum rated to 29 in Hg for negative-pressure installations
Carbon steel inline ball valve
The Dynaquip Controls VLE2.AK is a manual two-way ball valve with a carbon steel body and chrome-plated carbon steel ball. It uses a straight, two-piece construction and a full-port design. The valve connects via 1-inch FNPT threads and is rated for water media.
Installers needing high-pressure water shut-off
This valve suits plumbing systems that require a 3,000 psi operating pressure rating and full flow through a 1-inch line. It is not for steam lines exceeding 150 psi or for combustible gas service. Buyers who need a locking handle or 3-A sanitary compliance should look elsewhere.
3,000 psi operating pressure rating
The maximum operating pressure of 3,000 psi is the primary figure that determines if this valve matches the system design. It also carries a vacuum service rating of 29 in Hg and a steam limit of 150 psi. Verify these limits against the application requirements before purchase.
How it compares
Measured against everything we stock in Drain Stoppers, Strainers & Traps, at today’s prices. Recalculated every night.
- Price $77.99
- Pricier than about 72% of the 4,240 comparable items (median $31.99).
Specifications
| Product | |
|---|---|
| Brand name | Dynaquip Controls |
| Model name | VLE2.AK 1 in |
| Product type | Drain Components |
| Size & build | |
| Main material | HAWA |
Questions about this item
What pipe thread does the 1" FNPT carbon steel ball valve require?
It connects to 1-inch female National Pipe Thread fittings on each end for inline installation.
How is the two-piece carbon steel ball valve installed without damaging the seats?
Hold the valve body with a wrench on the flats while tightening each pipe joint to avoid twisting the internal components.
When should the chrome-plated carbon steel ball or seats be replaced?
Replace them if leakage appears at the maximum operating pressure of 3000 psi or if steam service exceeds 150 psi.
More in Drain Stoppers, Strainers & Traps
Similar items
Legris 7886 11 11 Lockout Valve 1/8 NPT Brass 145 psi 158F
- Drain Components
- HAWA
Orion WA-1 Waste Assembly Trap .23" x 2.48" x 4.24" Black Polypropylene
- Drain Components
- Black





