We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact silver 1U server CPU cooler with black blower fan

Dynatron

Dynatron G199 1U Active Blower CPU Cooler Socket 1366

SKU CH-Q0YG-CRCET

Active blower cooler fits 1U servers using Intel Socket 1366

  • Accessory category17102
  • Active blower keeps 1U server CPUs cool
  • PWM control adjusts fan speed to load
  • Copper base spreads heat from Socket 1366 processors
  • Compact 1U height fits dense rack chassis

Server Socket 1366 Cooler

The Dynatron G199 is a 1U active blower cooler built for Intel Socket 1366 platforms. It fits rackmount chassis where vertical clearance is limited to a single rack unit. The copper base transfers heat from the processor to the aluminium fin stack. PWM control adjusts fan speed to match the thermal load.

Thermal Operation

The blower design pushes air across the fins and exhausts it toward the rear of the chassis. PWM regulation keeps acoustic output proportional to the CPU temperature. Copper construction provides a direct thermal path without additional heat pipes. Power draw scales with the fan speed demanded by the motherboard.

How it compares

Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.

Price $41.99
Pricier than about 88% of the 6,190 comparable items (median $20.99).

Specifications

Product
Accessory category17102

Questions about this item

How is the 1U blower cooler secured to a Socket 1366 motherboard, and which step is often missed?

Align the mounting bracket with the four retention holes around the LGA 1366 socket, then tighten the captive screws in a diagonal pattern. The step often missed is checking that the blower outlet faces the chassis exhaust vent before final torque.

What maintenance will the PWM blower assembly need over time?

Dust builds up on the copper fin stack and blower wheel, reducing airflow. Power down the server, remove the cooler, and use compressed air to clear the fins and fan blades every six to twelve months depending on environment.

More in Laptop Cooling Stands & Fans

Similar items