We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eagle Tool US cable installer bit 3/4 inch 54 inch carbon steel powder coated

Eagle Tool Us

Eagle Tool Us ESP75054 Cable Installer Bit 3/4in 54in Carbon Steel

SKU CH-KJ8K-T9KD6

A 54-inch carbon-steel installer bit with a 3/4-inch masonry tip drills to 52 inches for cable pulls

  • Drill 52 in deep with 54 in overall length
  • 3/4 in bit bores wide cable pathways
  • 1/4 in hex shank fits standard drills
  • Powder-coated carbon steel resists corrosion
  • Screw-point tip pulls bit through masonry fast

Cable installer bit for electricians

The Eagle Tool US ESP75054 is a screw-point drill bit designed for pulling cable through masonry and wood framing. Its 54 inch overall length and 52 inch maximum drilling depth let installers reach through multiple studs or joists without extensions. The 3/4 inch cutting diameter creates a clean hole for standard residential wiring. A 1/4 inch hex shank with three flats locks securely into drill chucks and quick-change adapters.

Powder coating reduces friction and heat

The black powder-coated finish lowers drag while the bit bores deep holes, keeping the cutting edges cooler during extended runs. Three flats on the shank prevent slippage under high torque, so the drill motor transfers power efficiently without stalling. No special lubrication or cooling steps are required for normal installation work.

Hex shank fits common drill chucks

The 1/4 inch hex shank works with standard cordless drills, right-angle drills and impact drivers already on the job site. No proprietary adapters or brand-specific accessories are needed to start drilling. The straight, three-flat profile also allows the bit to be held firmly in a bench vise for hand-powered applications when power is unavailable.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $41.99
Pricier than about 62% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameEAGLE TOOL US

Questions about this item

How do I secure the 1/4 in hex shank in my drill chuck, and what step prevents it from slipping?

Insert the 1/4 in hex shank fully into the chuck and tighten each flat against the jaws so the three flats seat evenly; an uneven grip on the flats is the step most often missed.

Will the powder coating wear off and require touch-up or replacement of the bit?

The powder coating protects the carbon steel during normal drilling; inspect the flutes after heavy masonry work and replace the bit when the cutting edges dull rather than re-coating.

What stops me from drilling deeper than 52 in with this 54 in bit?

The 52 in maximum drilling depth is the practical limit; the remaining length accommodates the shank and chip clearance, so sustained pressure beyond that depth reduces cutting efficiency.

More in Bits, Hole Saws & Accessory Kits

Similar items