We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent thermoplastic fuse holder for DIN rail, 1000V DC, 30A, one pole

Eaton Bussmann

Eaton Bussmann CHPV1U Fuse Holder 1000V DC 30A 1 Pole

SKU CH-MHC4-0HNKN

A 1000V DC, 30A fuse holder for solar fuses, DIN-rail mount with box-lug terminals accepting 18 to 4 AWG wire

  • Product typeFuses & Accessories
  • Product colorTransparent
  • Holds solar fuses up to 30 A at 1000 V DC
  • Finger-safe thermoplastic body meets CE, CSA, UL standards
  • DIN-rail mount fits 18–4 AWG box-lug wiring
  • Single-pole design accepts 1-1/2 in × 13/32 in fuse series
  • Compact 2.43 × 0.69 × 2.91 in footprint saves panel space

Eaton Bussmann CHPV1U Fuse Holder

The Eaton Bussmann CHPV1U is a single-pole fuse holder rated for up to 30 amps at 1000 volts DC. It accepts cylindrical fuses measuring 1-1/2 inches long by 13/32 inches in diameter from compatible series such as HP10M, PV-F, SPF, SPFS and CHPV. The transparent thermoplastic body provides finger-safe protection and mounts directly on standard DIN rail for photovoltaic and DC circuit installations. Builders needing higher pole counts or AC-rated holders should look elsewhere.

Thermals noise and power draw

As a passive component the holder adds negligible resistance and generates no audible noise during normal operation. The box-lug connectors accept solid or stranded wire from 18 to 4 AWG ensuring a secure low-loss connection that runs cool within its 30-amp rating. The UL-listed and CSA-certified thermoplastic housing maintains its dielectric strength across the full 1000-volt DC range without active cooling.

Upgrade path and fit

This holder replaces open-style fuse blocks that lack finger-safe enclosures or DIN-rail mounting. The compact footprint of 2.43 inches high by 0.69 inches wide by 2.91 inches long fits tight panel layouts where older bulkier blocks cannot. The jump is worthwhile when a project requires CE-marked, UL-listed finger-safe construction and direct DIN-rail attachment for 1000-volt DC solar strings.

How it compares

Measured against everything we stock in AV Accessories & Components, at today’s prices. Recalculated every night.

Price $20.99
Cheaper than about 70% of the 3,838 comparable items (median $41.99).

Specifications

Product
Brand nameEATON BUSSMANN
Product typeFuses & Accessories
Product colorTransparent

Questions about this item

How do I install the CHPV1U fuse holder on DIN rail and what wire range fits the box lug?

Snap the holder onto standard DIN rail; the box lug accepts solid or stranded wire from 18 to 4 AWG. Tighten the lug screws to the torque printed on the body so the connection stays secure under vibration.

What maintenance or replacement will the CHPV1U need over time?

The holder itself is non-indicating and has no moving parts, so it only needs periodic visual checks for discoloration or loose lugs. Replace the fuse — HP10M, PV-F, SPF or SPFS series, 1-1/2 in × 13/32 in — after any over-current event.

What is the first limit reached under sustained 30 A load at 1000 V DC?

The UL-listed rating caps continuous current at 30 A and voltage at 1000 V DC. Exceeding either trips the fuse; the thermoplastic body and finger-safe design remain within their thermal limits at the rated load.

More in AV Accessories & Components

Similar items