Eaton C22-L-B-120 Raised Indicator Light Blue 120VAC 22mm
A 22 mm blue LED panel light rated for 120 V AC with IP67 and IP69K sealing
- Brand nameEATON
- Engine size22 mm Mounting dia
- Reliable panel status with 100,000-hour LED life
- Withstands wash-down environments rated IP67 and IP69K
- Fits standard 22mm cut-outs for quick installation
- Operates on 120V AC drawing only 20 mA
- Certified to UL, CSA and IEC 60947 standards
Industrial panel indicator
The Eaton C22-L-B-120 is a 22mm flush-mounted LED pilot light for 120V AC control panels. Its polycarbonate lens emits blue illumination drawing 20 mA. Rated IP67 and IP69K with NEMA 13 and 4X enclosure protection, it suits harsh industrial environments. Certified to CSA, EN 60947, IEC 60947 and UL Listed standards.
Sustained operation profile
Continuous duty at 120V AC maintains steady luminance without thermal derating. The LED averages 100,000 hours of service life under rated voltage. Low 20 mA current draw minimises heating inside dense panel layouts. Terminal clamp connections resist vibration loosening during prolonged equipment cycles.
22mm mounting constraints
Panel cutout must accept 22mm diameter with thickness up to 0.930 in for secure fit. Terminal clamps accommodate solid or stranded wire within the device's electrical rating. IP69K rating permits high-pressure washdown but does not imply submersion capability. Compliance with EN 60947 and IEC 60947 covers industrial control circuit requirements.
How it compares
Measured against everything we stock in Bench & DC Power Supplies, at today’s prices. Recalculated every night.
- Price $37.99
- Typical for this category: the median of 677 items is $33.99.
Specifications
| Product | |
|---|---|
| Brand name | EATON |
| Size & build | |
| Engine size | 22 mm Mounting dia |
Questions about this item
How much heat does the 20 mA LED draw produce when the indicator runs continuously?
At 20 mA and 120 V AC the indicator dissipates only a few watts, so heat output is negligible for panel installations.
What panel cut-out and thickness does the 22 mm mounting diameter require?
The light fits a 22 mm diameter cut-out in panels up to 0.930 in thick and secures with the supplied terminal clamp.
Will the IP67 and IP69K seals survive vibration from older generator sets mounted on the same panel?
The polycarbonate housing meets NEMA 13, 4X, IP67 and IP69K, so it resists water jets, high-pressure wash-down and vibration in industrial environments.
More in Bench & DC Power Supplies
Similar items
Samlex America Evolution F Series 1200W 120V Pure Sine Wave Inverter Charger 24V 40A
- Samlex America
Schneider Electric 9001KY2 30 mm 2-Hole Aluminum Enclosure
- SCHNEIDER ELECTRIC
Dayton 32W277 Push Button Control Station 22 mm 1NC Mushroom Head
- DAYTON
- 22 mm





