Eaton C22-PVT60P-K02 22 mm Emergency Stop Push Button Red
A 22 mm red emergency stop push button with a 60 mm plastic mushroom head, 2NC contacts rated 1.5 A at 230 V AC and 3 A at 24 V DC, IP67 and IP69K sealed, meeting UL, CSA and IEC 60947 standards
- Brand nameEATON
- Engine size22 mm
- Instant emergency shutdown with 60 mm mushroom head
- Two normally closed contacts rated 1.5 A at 230 V AC
- Sealed IP67 and IP69K for wash-down environments
- Complies with EN 60947, IEC 60947, UL and CSA standards
- Silver nylon bezel and plastic construction resist corrosion
Emergency Stop Button for Industrial Panels
The Eaton C22-PVT60P-K02 is a 22 mm emergency stop push button designed for machine safety circuits. It mounts in a standard panel cut-out and provides a maintained-action latch that stays engaged until deliberately reset. The red 60 mm mushroom head ensures high visibility and easy actuation in urgent situations.
Sealed Construction Withstands Harsh Environments
The operator head is completely sealed and carries IP67 and IP69K ratings, resisting dust ingress and high-pressure washdown. NEMA ratings 1, 3, 4X, 12 and 13 confirm suitability for indoor and outdoor industrial enclosures. The plastic head and silver nylon bezel resist corrosion and impact during sustained operation.
Two Normally Closed Contacts Rated 1.5 A at 230 V AC
The switch block provides 2NC contacts with AC-15 and DC-13 utilisation categories. Screw-clamp terminals accept field wiring without special tools. The contact rating of 1.5 A at 230 V AC and 3 A at 24 V DC determines the maximum control-circuit load the device can switch directly.
How it compares
Measured against everything we stock in Bench & DC Power Supplies, at today’s prices. Recalculated every night.
- Price $63.99
- Pricier than about 63% of the 677 comparable items (median $33.99).
Specifications
| Product | |
|---|---|
| Brand name | EATON |
| Size & build | |
| Engine size | 22 mm |
Questions about this item
How much heat does the 22 mm emergency stop button generate when the 1.5 A AC-15 contact runs continuously?
The push button itself has no active electronics, so it produces no measurable heat; only the wiring and load determine temperature rise.
What voltage supply and wiring must already be in place for the screw-clamp terminals to accept the 3 A DC-13 rating?
A 24 V DC circuit with conductors sized for at least 3 A and a compatible 22 mm panel cut-out are required.
Will the IP67 and IP69K sealed plastic head survive alongside older NEMA 1, 12 and 13 enclosures?
Yes — the operator meets NEMA 1, 12, 13, 3, 4X and the higher IP ratings, so it fits legacy enclosures without degrading their sealing.
More in Bench & DC Power Supplies
Similar items
Samlex America Evolution F Series 1200W 120V Pure Sine Wave Inverter Charger 24V 40A
- Samlex America
Eaton M22-PVLT Emergency Stop Push Button 22 mm Red Illuminated
- EATON
- 22 mm
Schneider Electric 9001KY2 30 mm 2-Hole Aluminum Enclosure
- SCHNEIDER ELECTRIC





