Eaton EHBPL1500R-PDU1U 120V 15A PDU
A 120 V, 15 A basic power distribution unit with six 5-15R outlets for rack-mounted equipment
- Product typeBasic
- 120 V input connects directly to UPS via 5-15P plug
- Six 5-15R outlets distribute power to rack equipment
- Hot-swap bypass maintains uptime during UPS servicing
- 15 A rating supports up to 1500 VA loads
- 1 U form factor fits standard server racks
FlexPDU for UPS mounting
The Eaton FlexPDU is a basic power distribution unit designed for close mounting to a UPS using its short power cord. It suits server rooms and network closets where rack-mounted equipment needs reliable outlet expansion from a single UPS feed.
HotSwap bypass enables continuous service
The HotSwap Maintenance Bypass allows UPS battery replacement without powering down connected loads, maintaining uptime during routine service. Six NEMA 5-15R outlets provide standard connections for servers, switches and peripherals in 120 V environments.
15 A input limits total connected load
The 5-15P input plug restricts aggregate draw to 15 A at 120 V, so the combined equipment load must stay within that rating. The unit adds no metering, switching or remote management, so it suits installations that only need basic outlet multiplication.
How it compares
Measured against everything we stock in Rackmount PDUs, at today’s prices. Recalculated every night.
- Price $244.99
- Cheaper than about 66% of the 643 comparable items (median $451.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | Eaton |
| Model name | EHBPL1500R-PDU1U |
| Product type | Basic |
Questions about this item
What does the 5-15P input plug and six 5-15R outlets mean for 120 V, 15 A service?
The NEMA 5-15P plug connects to a standard 120 V, 15 A branch circuit, and each of the six NEMA 5-15R outlets can supply up to the full 15 A rating, sharing the single circuit.
How much rack depth does the 1U FlexPDU need for close UPS mounting?
The 1U high chassis is designed for shallow rack depth, and the short input cord allows it to sit directly beside the UPS without excess cable slack.
How is the HotSwap Maintenance Bypass wired so the UPS can be swapped without dropping the load?
The bypass switch routes utility power around the UPS; turn it to Bypass before removing the UPS, then return it to Normal after the new unit is powered up.
More in Rackmount PDUs
Similar items
CyberPower CPS1215RM 120V 15A Basic PDU 10 Outlets 15ft NEMA 5-15P 1U
- 1U
- 1U
Eaton EHBPL2000R-PDU1U FlexPDU 1.92 kVA 125 V 6-Outlet PDU
- 125 V AC
- 125 V AC
Tripp Lite PDUMV20 Metered PDU 20A 28 Outlets 120V 15ft 0U Vertical
- 0U
- 120 V
APC AP9563 1U Basic Rack PDU 120V 20A 10 Outlets 12ft Cord
- 120 V
- AP9563





