We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular Eaton probe, matte finish, 1.15 by 1.48 by 2.26 inches

Eaton

Eaton EMPDT1H1C2 Environmental Monitoring Probe accessory

SKU CH-SG8Y-ED37W MPN EMPDT1H1C2

Monitors temperature, humidity and two dry-contact points in rack enclosures, requires a NETWORK-M2 card and supports up to three daisy-chained probes

  • Compatible with10/100Mb ConectUPS-X, ConnectUPS-BD and ConnectUPS-E with RW
  • Key featuresThe optional Eaton Environmental Monitoring Probe (EMP) Gen
  • Product dimensions1.15 in × 1.48 in × 2.26 in
  • Product weight1.19 oz
  • Monitors temperature and humidity in rack enclosures
  • Tracks two dry-contact status inputs for alarm conditions
  • Connects to NETWORK-M2 card for remote data access
  • Up to three probes daisy-chain on one card
  • Compact 1.15" x 1.48" x 2.26" form factor fits tight spaces

Product identity

The Eaton EMPDT1H1C2 is a Generation 2 Environmental Monitoring Probe that measures temperature, humidity and two dry-contact status points. It is designed for IT managers who need remote visibility of rack conditions through a compatible Network-M2 card.

Compatibility check

Verify that your UPS or connectivity card is a 10/100Mb ConectUPS-X, ConnectUPS-BD or ConnectUPS-E running firmware RW V3.01 or higher and that a Network-M2 card is installed. The older EMP001 probe will not work with this generation.

Accessory impact

Up to three Gen 2 probes can be daisy-chained on a single Network-M2 card, expanding coverage without additional network ports. The compact 1.15 x 1.48 x 2.26 inch form factor and 1.19 oz weight allow placement in tight rack spaces.

How it compares

Measured against everything we stock in UPS Replacement Batteries, at today’s prices. Recalculated every night.

Price $218.99
Pricier than about 86% of the 3,915 comparable items (median $39.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEATON
Model nameEMPDT1H1C2
Product typeOther
Size & build
Product dimensions1.15 in × 1.48 in × 2.26 in
Product weight1.19 oz
Shipping weight0.45 kg
Package size150 × 115 × 40 mm
Compatibility
Compatible with10/100Mb ConectUPS-X, ConnectUPS-BD and ConnectUPS-E with RW V3.01 and higher
Note: The EMPDT1H1 probe is only compatible with the Network-M2 card; the existing EMP001 probe is not compatible with the new Network-M2 card.

Questions about this item

What comes in the box with the EMPDT1H1C2 and do I need to buy a Network-M2 card separately?

The probe is supplied as a single unit; a compatible NETWORK-M2 card is required and is not included.

Which probe version should I choose if I already have an older EMP001 probe?

The EMPDT1H1C2 is the Generation 2 probe and works only with the NETWORK-M2 card; the EMP001 is not compatible with that card.

What do the temperature and humidity readings actually tell me once the probe is installed in a rack?

The device reports real-time temperature and humidity values plus two dry-contact status points, allowing remote monitoring of rack conditions.

More in UPS Replacement Batteries

Similar items