Eaton M22-PVT-K02 Emergency Stop Push Button 22 mm Red 1NO/2NC
22 mm red emergency-stop push button with 45 mm mushroom head, 1NO/2NC contacts rated 3 A at 24 V DC and 6 A at 230 V AC, IP67/IP69K and NEMA 1, 2, 3, 4, 4X, 13 sealed
- Brand nameEATON
- Engine size22 mm
- Immediate emergency stop with maintained 45 mm mushroom head
- Reliable switching via 1NO/2NC contacts rated 6A at 230V AC
- Withstands harsh environments with IP67 and IP69K sealing
- Fits standard 22 mm panel cut-outs for quick installation
- Certified to CE, UL, CSA and Bureau Veritas standards
Eaton 22 mm Emergency Stop Button
The Eaton M22-PVT-K02 is a maintained-action emergency stop push button designed for industrial safety circuits. It features a red 45 mm mushroom head made of plastic with a polycarbonate bezel. The unit provides one normally open and two normally closed contacts rated at 6 A at 230 V AC and 3 A at 24 V DC. It mounts in a standard 22 mm panel cut-out.
Suited for safety panels needing IP67
This device fits control stations that require NEMA 1, 2, 3, 4, 4X and 13 ingress protection alongside Bureau Veritas, CCC, CE, CSA, GOST-R, Lloyd's Register and UL listings. Screw-clamp terminals simplify wiring for maintenance teams. Operations needing an illuminated head or a different contact arrangement should consider alternative models.
Maintained 1NO/2NC contact block
The single operator uses a maintained push-pull action to latch the emergency stop condition until manually reset. Contact ratings follow NEMA AC-15 and DC-13 designations for reliable switching. This specific contact configuration determines compatibility with the safety relay or controller input requirements.
How it compares
Measured against everything we stock in Bench & DC Power Supplies, at today’s prices. Recalculated every night.
- Price $68.99
- Pricier than about 65% of the 677 comparable items (median $33.99).
Specifications
| Product | |
|---|---|
| Brand name | EATON |
| Size & build | |
| Engine size | 22 mm |
Questions about this item
Should I pick the 1NO/2NC version or a different contact form?
The 1NO/2NC arrangement gives you one normally-open and two normally-closed circuits so the stop signal stays active even if one contact fails.
What does the 6 A at 230 V AC rating mean when the button is wired into my panel?
It means each contact can switch up to 6 amps on a 230 V AC control circuit without overheating or welding.
How far can I run the screw-clamp wiring before the NEMA 4X and IP69K sealing is compromised?
The ratings apply to the operator itself; cable length does not affect the seal as long as the gland at the enclosure entry is correctly fitted.
More in Bench & DC Power Supplies
Similar items
Schneider Electric 9001KM38 Lamp Module 30mm 120VAC/VDC Clear Incandescent
- SCHNEIDER ELECTRIC
- 30 mm
Samlex America Evolution F Series 1200W 120V Pure Sine Wave Inverter Charger 24V 40A
- Samlex America
Schneider Electric 9001KY2 30 mm 2-Hole Aluminum Enclosure
- SCHNEIDER ELECTRIC
Eaton M22-I4-PG 22mm 4-hole polymer push-button enclosure
- EATON
- 22.5 mm





