Eaton NGR15881BNAAN Lighted Rocker Switch SPDT 7 Term 14V LED
A lighted rocker switch with SPDT contact form, seven connections, 14 V LED indicator, 0.250 in quick-connect terminals and IP42 rating
- Momentary on/off/on control for three-position switching
- 14 V LED indicator shows status at a glance
- SPDT 7-terminal layout fits complex circuits
- Rated 15 A at 28 V DC for robust loads
- IP42 rating resists dust and water splashes
Eaton SPDT Lighted Rocker Switch
The Eaton NGR15881BNAAN is a lighted rocker switch with SPDT contact form and seven connections. It operates with a momentary On/Off/Momentary On function and includes a 14V DC incandescent indicator light. The switch mounts in a 0.867 in x 1.734 in hole and uses 0.250 in quick-connect tab terminals. It is rated IP42 and carries CSA, RoHS and UL Listed approvals.
Suitable for Momentary Two-Position Control
This switch fits panels needing momentary actuation in both On positions with visual status indication. It supports AC loads up to 10 A at 250 V or 15 A at 125 V and DC loads up to 15 A at 28 V. Builders who need a maintained On/Off/On action or a different indicator voltage should look at other options.
SPDT 7-Terminal Momentary On/Off/On Function
The defining specification is the momentary On/Off/Momentary On switch function combined with SPDT contact form and seven terminals. This determines whether the switch matches the required control logic for the application.
How it compares
Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.
- Price $14.99
- Cheaper than about 87% of the 1,098 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | EATON |
Questions about this item
What size mounting hole does the 15881 rocker switch require?
The switch fits a rectangular cut-out of 0.867 in by 1.734 in.
Which terminals accept the 0.250 in quick-connect tabs during wiring?
All seven terminals are 0.250 in quick-connect tabs; crimp matching female connectors onto each wire before pushing them on.
When should the 14 V DC indicator lamp be replaced?
Replace the built-in lamp when it no longer illuminates with the switch in either On position while 14 V DC is present.
More in Contactors, Relays & Motor Starters
Similar items
Value Brand Snap Action Switch Panel Mount Plunger Roller Actuator 15A 480V SPDT
TORK nsi DWZ200B Electronic Timer 365 Day SPDT 20A 120-277VAC
- IEC Delay Timers





