Eaton NGR25681BNAAN Lighted Rocker Switch DPDT 10A 15A 28V IP42 14V LED
DPDT lighted rocker switch with 14V LED indicator, rated 10A at 250VAC and 15A at 28VDC, IP42 sealed
- DPDT On/Off/On control for three-position circuit switching
- 14 V LED indicator shows switch status at a glance
- IP42 rated enclosure resists dust and splashing water
- 15 A at 28 V DC rating handles high-current loads
- UL listed, CSA certified and RoHS compliant for safety assurance
Eaton DPDT Rocker Switch
This Eaton lighted rocker switch provides double-pole double-throw operation with an on/off/on function. It is built for 125 V AC at 15 A, 250 V AC at 10 A, and 28 V DC at 15 A. The 14 V DC incandescent indicator illuminates the actuator for clear status visibility. IP42 rating protects against solid objects and dripping water.
Upgrade From Single-Pole Switches
Install this switch when a circuit requires control of two separate loads from one actuator or when a centre-off position is needed for motor reversal. The jump is worth it if the existing single-pole device cannot handle 15 A at 28 V DC or lacks the illuminated feedback for low-light panels. It does not suit buyers who need a momentary action or a sealed IP67 rating for direct spray environments.
Quick-Connect Panel Mount
Terminals accept 0.250 in quick-connect tabs for fast wiring without soldering. The rectangular mounting hole measures 0.867 in by 1.734 in, so verify panel cut-out dimensions before drilling. Common issues include forcing tabs onto undersized terminals and exceeding the 10 A rating at 250 V AC, which can overheat the contacts.
How it compares
Measured against everything we stock in Contactors, Relays & Motor Starters, at today’s prices. Recalculated every night.
- Price $13.99
- Cheaper than about 88% of the 1,098 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | EATON |
Questions about this item
What size mounting hole does the Eaton NGR25681BNAAN rocker switch require?
The switch fits a rectangular cut-out of 0.867 in by 1.734 in.
How do I wire the quick-connect tabs on this DPDT switch, and what mistake should I avoid?
Push the 0.250 in quick-connect terminals onto the tabs; the common error is reversing the On/Off/On positions so the centre-off function is lost.
When will the 14 V incandescent indicator lamp need replacement?
The lamp is rated for 14 V DC operation; replace it when illumination dims or fails, as the LED is not separately serviceable.
More in Contactors, Relays & Motor Starters
Similar items
Value Brand Snap Action Switch SPDT 20 A 480 V Panel Mount Plunger Actuator
TORK nsi DWZ200B Electronic Timer 365 Day SPDT 20A 120-277VAC
- IEC Delay Timers





