We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eaton XTCE015B10E magnetic contactor, transparent housing, DIN rail mount, screw terminals, 3-pole, 208V AC coil, 15A inductive

Eaton

Eaton XTCE015B10E Magnetic Contactor 208V AC 3P 1NO 15A

SKU CH-TEA3-9HFE8

IEC magnetic contactor switches 15 A inductive loads at 208 V AC with a 1 NO auxiliary contact and DIN-rail mounting

  • Product typeIndustrial Electrical Controls & Automation
  • Product colorTransparent
  • IEC magnetic contactor rated for 208 V AC three-phase control
  • 15 A inductive full-load current handles motor-starting duty
  • 5 hp at 240 V AC three-phase for compact power switching
  • 1 NO auxiliary contact provides ready status feedback
  • DIN-rail or panel mounting fits standard industrial enclosures

Industrial motor control

The Eaton XTCE015B10E is an IEC magnetic contactor rated for 15 A inductive and 22 A resistive loads at 208 V AC. It switches three-phase circuits up to 5 hp at 240 V AC and mounts on DIN rail or panel for panel-builders and maintenance engineers.

Coil power and enclosure

The 208 V AC coil draws only the current required for the 10 mm frame B contactor, so steady-state dissipation stays low inside the open enclosure. With no integral fan, acoustic output is limited to the mechanical click of the three main poles and the single normally-open auxiliary.

Screw-terminal wiring

Screw terminals accept standard ferrules or bare conductors, reducing installation time compared with spring-cage alternatives. The 1NO auxiliary contact provides a ready-made feedback signal for PLCs or indicator lights without extra accessories.

How it compares

Measured against everything we stock in AV Accessories & Components, at today’s prices. Recalculated every night.

Price $93.99
Pricier than about 73% of the 3,838 comparable items (median $41.99).

Specifications

Product
Brand nameEaton
Product typeIndustrial Electrical Controls & Automation
Product colorTransparent

Questions about this item

How do I mount the contactor on a DIN rail and connect the screw terminals without missing a step?

Snap the unit onto a standard DIN rail or panel-mount it using the frame B slots, then tighten each screw terminal to the specified torque so the 208 V AC coil and three power poles make solid contact.

Which components will need checking or replacement after extended service?

The 1NO auxiliary contact and main power contacts should be inspected for wear or pitting, and the 208 V AC coil should be tested for consistent pull-in after many switching cycles.

At what load does the contactor reach its thermal limit first during continuous operation?

The inductive full-load rating of 15 A at 208 V AC is the limiting threshold; sustained current above that level will cause the contactor to overheat before the 22 A resistive rating is reached.

More in AV Accessories & Components

Similar items