We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eaton XTCE018C10E 3-pole contactor, transparent housing, DIN rail mount, screw terminals

Eaton

Eaton XTCE018C10E 3-Pole 208V AC 18A Magnetic Contactor

SKU CH-DYSN-YAGZV

IEC magnetic contactor with 208V AC coil, 3 poles, 18A inductive and 40A resistive ratings, 1NO auxiliary contact, DIN-rail or panel mounting, screw terminals, 3.9in high and 1.85in wide

  • Product typeIndustrial Electrical Controls & Automation
  • Product colorTransparent
  • Controls 18 A inductive loads with 3-pole 208 V AC coil
  • Handles 40 A resistive current for heating or lighting circuits
  • Mounts on DIN rail or panel in compact 3.9 × 1.85 in frame
  • Includes 1 NO auxiliary contact for status signalling
  • Rated 5 hp at 240 V three-phase for motor starting

Eaton XTCE018C10E Magnetic Contactor

This Eaton XTCE018C10E is a three-pole IEC magnetic contactor rated for 208V AC coil voltage and 18 A inductive full-load current. It suits industrial control panels that switch motor loads up to 5 hp at 240V AC three-phase. The unit mounts on DIN rail or panel and uses screw terminals for wiring. It is not intended for reversing applications or for loads exceeding its 40 A resistive rating.

Sustained load behaviour

Under continuous operation the contactor handles 18 A inductive and 40 A resistive current within its frame size C dimensions of 3.9 in height and 1.85 in width. The coil draws power at 208V AC without a reversing mechanism, so heat dissipation relies on the open enclosure design. Installers should verify ventilation when the device runs at full inductive rating for extended periods.

Installation notes

Mounting options include standard DIN rail or direct panel fixing using the integral screw terminals for power and auxiliary connections. The single 1NO auxiliary contact provides status feedback without additional modules. A common error is assuming reversing capability; this model is non-reversing and lacks the required auxiliary interlock. Ensure the control circuit matches the 208V AC coil specification before energising.

How it compares

Measured against everything we stock in AV Accessories & Components, at today’s prices. Recalculated every night.

Price $109.99
Pricier than about 77% of the 3,838 comparable items (median $41.99).

Specifications

Product
Brand nameEaton
Model nameXTCE018C10E
Product typeIndustrial Electrical Controls & Automation
Product colorTransparent

Questions about this item

How much heat does the 18 A contactor produce when it runs continuously?

The coil draws 208 V AC and the unit is rated for 18 A inductive or 40 A resistive load; power dissipation depends on the actual current and duty cycle in your circuit.

What auxiliary circuit must already exist for the 1 NO contact to function?

The built-in 1 NO auxiliary contact needs a separate low-voltage control circuit to monitor or interlock with the main 3-pole power path.

Will the 208 V AC coil work with my existing 240 V AC control panel?

The coil is rated for 208 V AC only; applying 240 V AC exceeds its voltage rating and can cause overheating or failure.

More in AV Accessories & Components

Similar items