We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small transparent IEC contactor with screw terminals, DIN rail mount, 2.28 by 1.77 inches

Eaton

Eaton XTMC6A10E Miniature Magnetic Contactor 1NO 208V AC 3P

SKU CH-3T0P-HMM06

Miniature IEC magnetic contactor with 1NO auxiliary contact, 208 V AC coil, three poles and 6 A inductive rating for DIN-rail or panel mounting

  • Product typeIndustrial Electrical Controls & Automation
  • Product colorTransparent
  • IEC miniature contactor fits tight panels at 1.77 in wide
  • 208 V AC coil integrates with standard three-phase supplies
  • 6 A inductive rating handles motor loads reliably
  • Screw terminals speed up DIN-rail or panel installation
  • Single 1 NO auxiliary contact simplifies control-circuit wiring

Compact IEC Contactor for Light Industrial Loads

The Eaton XTMC6A10E is a miniature three-pole magnetic contactor rated for 6 A inductive and 20 A resistive loads at 208 V AC. It mounts on DIN rail or panel and uses screw terminals for secure wiring in control panels, motor starters and lighting circuits. The single normally-open auxiliary contact supports simple status feedback or interlock logic. Buyers needing reversing operation or additional auxiliary contacts cannot use this model.

Cooling, Noise and Power Draw

The open-frame design relies on natural convection, so the device runs silently without forced airflow. Coil power consumption is low, typical for a Frame Size A IEC contactor, leaving minimal thermal load inside the enclosure. No fan or heatsink is required, keeping installation simple and maintenance free. Installers must still provide adequate ventilation around the 2.28 in height and 1.77 in width footprint.

Mounting Flexibility and Accessory Support

Dual DIN rail and panel mounting options let the contactor fit existing cabinet layouts without extra brackets. Screw terminals accept standard ferrules or solid wire, reducing the need for specialised crimping tools. The 1NO auxiliary block is factory fitted, so no separate accessory kit is required for basic signalling. Users who need extra poles, timer modules or surge suppressors must source compatible XT-series add-ons separately.

How it compares

Measured against everything we stock in AV Accessories & Components, at today’s prices. Recalculated every night.

Price $48.99
Pricier than about 55% of the 3,838 comparable items (median $41.99).

Specifications

Product
Brand nameEaton
Product typeIndustrial Electrical Controls & Automation
Product colorTransparent

Questions about this item

How do I install the XTMC6A10E on a DIN rail and what step is often missed?

Clip the contactor onto a standard DIN rail using the integrated latch, then secure it with the screw terminals at 1.77 in width; the step often missed is tightening the screws to the specified torque so the 6 A inductive load stays firm.

What maintenance will the XTMC6A10E need over its service life?

Periodically inspect the screw terminals for discoloration or loosening caused by the 208V AC coil cycling, and verify the 1NO auxiliary contact operates cleanly; no user-serviceable parts inside the sealed frame.

Which limit appears first when the XTMC6A10E runs continuously at full load?

The 6 A inductive full-load current rating is the first limit reached under sustained use, so the contactor must not switch loads exceeding that value without additional protection.

More in AV Accessories & Components

Similar items