Eco-Max 058419-1 battery terminal straight 1-2 ga pink negative pk5
Straight crimp battery terminal for 1–2 ga cable, negative polarity, pink colour code, tin-plated copper, RoHS and SAE J-1811 compliant, pack of five
- Product typeAutomotive Electrical & Lighting
- Highest conductivity rating for efficient power transfer
- Tin-plated copper resists corrosion in harsh environments
- Lead-free construction meets RoHS compliance standards
- SAE J-1811 certified for automotive safety
- Pack of five covers multiple terminal connections
Straight 1-2 ga battery terminal
This Eco-Max battery terminal uses a straight alignment and crimp connection for 1 to 2 gauge cables. The pink colour code identifies negative polarity. Copper construction with tin plating provides high conductivity and corrosion resistance. Each pack contains five terminals with bolts and nuts included.
Replaces worn or corroded negative terminals
Swapping a damaged clamp restores a solid electrical path and prevents voltage drop at the battery post. The crimp design suits installers who prefer a permanent, tool-set connection over bolt-on alternatives. RoHS compliance and SAE J-1811 listing confirm the terminal meets recognised safety and material standards.
Verify cable gauge and post polarity before ordering
Confirm the wire is 1 to 2 gauge so the crimp barrel fits correctly. Ensure the battery post is negative; the pink coding will not match a positive terminal. Check that the 3/8 inch stud size matches the vehicle's hold-down hardware. The 600 V maximum rating covers standard automotive electrical systems.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $26.99
- Cheaper than about 63% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | ECO-MAX |
| Product type | Automotive Electrical & Lighting |
Questions about this item
What cable gauge and stud size does the straight battery terminal accept?
The terminal fits 1 to 2 gauge cable and mounts on a 3/8 in stud.
How is the crimp connection made and what mistake should be avoided?
Strip the cable, insert it fully into the barrel, then crimp with a proper gauge tool; the common error is leaving a gap between wire and barrel.
When should the terminal be replaced and what indicates wear?
Replace if the tin plating shows corrosion, the copper turns green, or the bolt and nut threads are stripped.
More in Electrical Enclosures & Cabinets
Similar items
VEVOR SPT NEMA 4X IP66 Electrical Box 10 x 8 x 6'' Gray White RAL7035
- Other Appliances
VEVOR SP-CAG-203018 Electrical Box 300 x 200 x 180 mm IP67 IK08 ABS
- Other Appliances
Tatuo 2 Pcs Cable Organizer Box with 20 Wire Ties Black
- UL Listed/CSA Certi…
- Brass





