We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black LCD screen digitizer assembly with frame for Samsung Galaxy S10+

eForChina

eForChina LCD Screen Digitizer Assembly for Samsung Galaxy S10+ SM-G975 Black

SKU CH-4483-REXM1

A replacement LCD screen and digitizer assembly with frame for the Galaxy S10+ SM-G975 that does not support fingerprint identification

  • Product typeAccessory
  • Product colorBlack
  • Replacement display for Samsung Galaxy S10+ SM-G975
  • Touch digitizer and LCD assembled with frame
  • Black finish matches original handset colour
  • Test before fitting to confirm function
  • Flex cable must not bend beyond 90 degrees

Replacement Screen Assembly for Galaxy S10+ SM-G975

This replacement LCD and digitizer assembly with frame fits the Samsung Galaxy S10+ model SM-G975 in black. It is intended for repair technicians or experienced owners replacing a cracked or non-functional display. The part does not support the in-display fingerprint identification feature.

Thermals Noise and Power Draw

As a passive display component the assembly generates no heat and produces no audible noise during operation. It draws power only through the device motherboard connection and adds no independent thermal load to the phone. No active cooling or additional power supply is involved.

Upgrade Context and Compatibility

This part replaces a damaged original screen on the same model and restores display and touch function without fingerprint sensing. The jump is worthwhile when the existing panel is broken or shows dead pixels and the user accepts loss of biometric unlock. Buyers who need fingerprint support or a different model fit cannot use this assembly.

How it compares

Measured against everything we stock in Phone Cases & Protective Covers, at today’s prices. Recalculated every night.

Price $40.99
Pricier than about 90% of the 9,189 comparable items (median $11.99).

Specifications

Product
Product typeAccessory
Product colorBlack

Questions about this item

How do I install the LCD screen digitizer assembly without damaging the flex cable?

Power off the phone, disconnect the battery, and connect the new assembly for a bench test before removing any protective film. Keep the flex cable bent no more than 90 degrees during routing, then secure the frame and reconnect the battery.

What part of the assembly will need replacement if the fingerprint reader stops working?

This assembly does not support fingerprint identification, so the in-display sensor on the original handset must remain functional; only the LCD and digitizer layer are replaced by this unit.

At what bend angle does the display cable risk a black screen during heavy daily use?

Bending the flex cable beyond 90 degrees can cause a black display, so route the cable with gentle curves and avoid sharp folds when closing the chassis.

More in Phone Cases & Protective Covers

Similar items