Elemental LED DI-0904-LPS LO-PRO Junction Box Driver Combo 12V DC 20W Ballast
A low-profile steel junction box with a 12V DC 20W constant-voltage driver for code-compliant low-voltage LED lighting
- Product typeBallasts
- Low-profile steel enclosure separates household and low-voltage wiring safely
- 12 V DC constant-voltage output pairs with 120 V switches and dimmers
- Class 2 rated 20 W driver limits power for code-compliant installations
- Hard-wired power supply integrates directly into low-voltage LED lighting circuits
- Rugged junction-box design meets electrical-code requirements for wiring separation
LO-PRO Junction Box Driver Combo
The Elemental LED DI-0904-LPS combines a low-profile steel junction box with a 12V DC constant voltage driver rated at 20W. It is designed for installers who need code-compliant separation of 120V household wiring from low-voltage LED circuits in a compact enclosure.
Hard-wired installation
The rugged steel box meets electrical codes that require physical separation of line and low-voltage conductors. Wiring is hard-wired on both sides; the low-profile form factor fits tight cavities but demands careful cable management to avoid pinching leads against the cover.
Verify voltage, wattage
Confirm the LED load operates at 12V DC and does not exceed the 20W Class 2 limit. This driver pairs with 120V switches, low-voltage dimmers or RGB/DMX controls; ensure your control scheme matches one of those methods. Check that the mounting location accommodates the box dimensions and local inspection requirements.
How it compares
Measured against everything we stock in Lamp Ballasts & Drivers, at today’s prices. Recalculated every night.
- Price $85.99
- Pricier than about 60% of the 265 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | DIODE LED |
| Product type | Ballasts |
Questions about this item
How can I verify the 12V DC 20W driver is operating correctly after hard-wiring it?
Measure the output with a multimeter to confirm a steady 12 V DC under load; the Class 2 rating means voltage stays within safe limits when the connected LED strip draws up to 20 W.
What components arrive in the LO-PRO Junction Box Driver Combo and what must I supply?
The combo includes the low-profile steel junction box with the integrated 12V DC constant-voltage driver; you must provide 120 V AC supply wiring, low-voltage LED load wiring, and any compatible dimmer or RGB/DMX controller.
Which version of the DI-0904-LPS should I choose for a 12V LED installation?
Select the 12V DC 20W constant-voltage model listed as DI-0904-LPS; it matches 12 V LED strips and supports up to 20 W of load within a code-compliant steel enclosure.
More in Lamp Ballasts & Drivers
