We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular 12V 35W LED driver unit

Elemental LED

Elemental LED DI-0918 12V 35W Ballast

SKU CH-8NB8-05PVK

A 12 V, 35 W constant-voltage LED driver for hard-wired low-voltage lighting systems

  • Product typeBallasts
  • Constant 12V output suits 120V switches and dimmers
  • Class 2 rated 35W driver meets low-voltage safety needs
  • Hard-wired design integrates with RGB and DMX controls
  • Multiple form factors match varied LED project layouts
  • California Prop 65 notice included for compliance awareness

12V 35W Constant Voltage Driver

This Elemental LED DI-0918 is a Class 2 DC constant voltage driver rated at 12 volts and 35 watts. It is designed for hard-wired low-voltage LED lighting installations that require a stable 12V supply. The unit supports integration with 120V switches, low voltage dimmers and RGB or DMX control systems.

Class 2 Safety Rating

The single specification that decides fit is the Class 2 designation combined with the 35W output limit. This rating permits installation without a dedicated conduit in many jurisdictions and caps the maximum load at 35 watts. Exceeding this wattage or using a non-Class 2 supply would violate the intended application.

Suits low-voltage LED runs needing 12V

Installers running 12V LED strips, fixtures or RGB/DMX systems within a 35W budget will find this driver matches the requirement. Projects demanding higher wattage, a different output voltage or a non-Class 2 power supply should look at alternative units.

How it compares

Measured against everything we stock in Lamp Ballasts & Drivers, at today’s prices. Recalculated every night.

Price $43.99
Cheaper than about 57% of the 265 comparable items (median $61.99).

Specifications

Product
Brand nameDIODE LED
Product typeBallasts

Questions about this item

How does the 35 W rating affect the LED strip length I can run from this driver?

The 35 W limit caps the total connected load; add the wattage of every strip section and keep the sum at or below 35 W to avoid overloading the driver.

What does the 12 V constant-voltage output mean for dimmer compatibility?

A 12 V constant-voltage output works with 120 V wall switches, low-voltage dimmers and RGB or DMX controllers designed for 12 V LED loads.

What wiring preparation is needed to hard-wire this Class 2 driver into a junction box?

The driver is hard-wired; provide line-voltage leads for the 120 V input and low-voltage leads for the 12 V output, then secure all connections inside a suitable junction box.

More in Lamp Ballasts & Drivers

Similar items