We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black metal box with wire leads, labelled 96W 24V DC driver

Elemental LED

Elemental LED DI-0954 96W 24V DC Constant Voltage Driver Ballast

SKU CH-6K3V-41VQW

24V DC constant voltage driver, Class 2, 96W for low-voltage LED lighting with 120V switches and dimmers

  • Product typeBallasts
  • Class 2 rating ensures safe low-voltage operation
  • 96 W output powers extended LED runs
  • 24 V DC constant voltage matches strip specifications
  • Hard-wired design integrates with 120 V switching circuits
  • Compatible with low-voltage dimmers and RGB DMX controls

What this driver powers

The Elemental LED DI-0954 is a 96W 24V DC constant voltage driver rated Class 2. It supplies steady power to low-voltage LED tape, modules or fixtures that require a 24V input. Installers use it when a 120V switch, low-voltage dimmer or RGB/DMX controller sits upstream of the lighting load. It is not for fixtures that demand a constant-current source or a different output voltage.

Deciding specification

The single figure that determines fit is the 96W maximum output at 24V DC. Your total connected LED load must stay at or below this wattage, otherwise the driver will trip or overheat. No other voltage, wattage or current rating is offered by this unit, so match the load exactly to these numbers.

Installation notes

The driver is hard-wired on both input and output sides, so connections are made inside a junction box with wire nuts or terminal blocks. Observe polarity on the 24V output leads; reversing them will prevent the LEDs from lighting. Ensure the enclosure provides adequate ventilation because the unit generates heat at full load. California Proposition 65 warns that this product contains a chemical known to cause birth defects or other reproductive harm.

How it compares

Measured against everything we stock in Lamp Ballasts & Drivers, at today’s prices. Recalculated every night.

Price $141.99
Pricier than about 82% of the 265 comparable items (median $61.99).

Specifications

Product
Brand nameDIODE LED
Product typeBallasts

Questions about this item

How much power can the 96 W driver deliver to a 24 V LED strip in practice?

It supplies up to 96 watts at a steady 24 volts, so the connected load must not exceed that wattage or the driver will hit its Class 2 limit.

What does the Class 2 rating on this 24 V driver cap in a real installation?

Class 2 limits the output to a safe voltage and current level, restricting the driver to 96 W maximum and simplifying wiring rules for low-voltage lighting.

What wiring space is needed to mount this hard-wired 96 W power supply?

The unit is designed for hard-wired installation, so you need a junction box or enclosure large enough for the driver body and the 120 V input plus 24 V output cables.

More in Lamp Ballasts & Drivers

Similar items