We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular NEMA 3R junction box with integrated 12V 10W dimmable driver

Elemental LED

Elemental LED DI-TD-12V-10W-LPS3R LO-PRO Wet Location Junction Box Driver Combo Ballast

SKU CH-RGZ7-HSMNG

A wet-location junction box and 10 W 12 V dimmable driver combo certified to UL 2108, UL 508A and UL 1598

  • Product typeBallasts
  • Smooth dimming down to 10 % with OMNIDRIVE electronic driver
  • Wet-location ready NEMA 3R junction box rated UL 2108, UL 508A, UL 1598
  • 10 W output at 12 V for low-voltage LED runs
  • Compatible with TRIAC, MLV, ELV and incandescent dimmers
  • California Proposition 65 warning for reproductive-harm chemical

LO-PRO wet-location driver combo

The Elemental LED DI-TD-12V-10W-LPS3R combines a 12-volt OMNIDRIVE dimmable driver with a NEMA 3R junction box rated for wet locations. The driver delivers 10 watts and dims smoothly from 100 per cent down to 10 per cent using TRIAC, MLV or ELV dimmers. UL 2108, UL 508A and UL 1598 certifications cover the power supply and enclosure for outdoor use. Designed and engineered in Reno, Nevada.

Upgrade from non-dimmable or indoor-only supplies

This unit replaces a basic transformer that cannot dim or lacks a weatherproof enclosure. The jump is worth it when the installation demands flicker-free dimming across multiple switch types and must survive rain, sprinklers or wash-down conditions. It is not for projects that need more than 10 watts of load or a higher input voltage than 12 volts.

Fits standard 12 V LED tape or fixture runs

The combo accepts 12-volt LED loads up to 10 watts and mounts as a single junction-box assembly. It frees the installer from sourcing a separate NEMA 3R box and wiring a driver inside it. The integrated filter removes flicker so the attached lights stay stable through the full dimming range. California Proposition 65 warning applies.

How it compares

Measured against everything we stock in Lamp Ballasts & Drivers, at today’s prices. Recalculated every night.

Price $131.99
Pricier than about 80% of the 265 comparable items (median $61.99).

Specifications

Product
Brand nameDIODE LED
Product typeBallasts

Questions about this item

What size junction box opening does the NEMA 3R enclosure need for mounting?

The LO-PRO NEMA 3R junction box is certified to UL 508A and UL 1598 for outdoor wet-location mounting; follow the enclosure's knockout pattern and local code for the correct opening size.

How do I wire the OMNIDRIVE driver to a TRIAC dimmer without causing flicker?

Connect the 12 V driver's input leads to the dimmer's load side, ensuring the dimmer is rated for magnetic or electronic low-voltage loads; the built-in electronic filter eliminates flicker down to 10 % brightness.

When should I replace the driver if the LEDs start dimming unevenly?

The OMNIDRIVE 10 W driver is UL 2108 listed; if output drops below 10 % or flicker returns despite a compatible dimmer, replace the driver unit inside the sealed NEMA 3R box.

More in Lamp Ballasts & Drivers

Similar items