Elemental LED VLM 200W 24V LO-PRO Large Junction Box Double Driver Ballast
A 24 V, 200 W low-profile junction box containing two 100 W VLM drivers for LED installations
- Product typeBallasts
- High-efficiency 24 V drivers with compact UL-listed design
- Double 100 W drivers deliver 200 W total power
- LO-PRO large junction box simplifies multi-driver installation
- Advanced 3D layout minimises noise and optimises energy flow
- Precision potting conducts heat uniformly for thermal efficiency
LO-PRO Large Junction Box
This 24V ballast kit combines one LO-PRO large junction box with two 100W VLM drivers for a 200W total capacity. It is intended for installers who need a compact, UL-listed power supply for low-voltage LED lighting projects. The potted construction conducts heat uniformly to the housing for reliable thermal performance in tight spaces.
200W total capacity across two 100W drivers
Each driver delivers 100W at 24V, giving comfortable headroom for extended LED runs without voltage drop. The dual-driver layout lets you balance loads across two circuits or combine them for a single larger zone. When the connected load approaches the combined 200W limit, you reach the practical ceiling and would need an additional junction-box-and-driver set.
Replaces bulky single-driver enclosures
The LO-PRO profile and 3D-optimised board layout shrink the footprint compared with traditional driver boxes, freeing space in cabinets and plenums. The jump is worth it when the existing enclosure is too deep for the mounting cavity or when thermal noise from older drivers causes flicker. It does not suit installations that require a single driver above 100W or voltages other than 24V.
How it compares
Measured against everything we stock in Lamp Ballasts & Drivers, at today’s prices. Recalculated every night.
- Price $223.99
- Pricier than about 90% of the 265 comparable items (median $61.99).
Specifications
| Product | |
|---|---|
| Brand name | DIODE LED |
| Product type | Ballasts |
Questions about this item
Will the double VLM driver setup run from my existing 24 V low-voltage wiring?
Yes, each of the two included drivers is rated for 100 W at 24 V, so the combination delivers 200 W on the same 24 V bus you already have.
How can I confirm both drivers are operating correctly after installation?
Verify that the total load draws up to 200 W at 24 V without flicker, and check that each driver’s UL-listed label is visible through the junction-box cover.
What components arrive in the package and what must I source separately?
The box contains one LO-PRO large junction box and two 100 W 24 V VLM drivers; you will need to supply the 24 V input cable, LED tape or fixtures, and any dimming or control accessories.
More in Lamp Ballasts & Drivers
