Intel EXPI9301CTBLK network card 10/100/1000Mbps PCI-Express
- 10/100/1000 Mbit/s
- PCIe
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A dual-port 10Gbps network adapter with PCIe 2.0 x8 interface and LC optical connectors for short-reach fibre links
The Emulex OCe11102-NM is a dual-port 10Gbps Ethernet network adapter built for rack-mount servers that need fibre connectivity. It installs in a PCIe 2.0 x8 slot and presents two LC connectors for 10GBASE-SR short-reach optics. The low-profile form factor fits standard or low-profile brackets.
Stateless TCP/IP and TCP Chimney offload move checksum, segmentation and receive scaling onto the BE3 controller, keeping host CPU utilisation low during continuous 10Gbps traffic. Jumbo frames up to 9000 bytes reduce per-packet overhead. The card operates from 0°C to 55°C at 5–95 % non-condensing humidity.
This adapter upgrades servers limited to a single 10GbE port or to copper SFP+ modules that cannot reach the required distance. It is not for desktop workstations lacking a PCIe 2.0 x8 slot or for environments that need long-reach single-mode fibre instead of short-reach multimode.
Measured against everything we stock in Ethernet Cards & NICs, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | Emulex |
| Model name | OCe11102-NM |
| Performance | |
| Rated speed | 10 Gbit/s |
| Connectivity | |
| Supported standards | PCI Express base spec 2.0, PCI Bus Power Management Interface, rev. 1.2, Advanced Error Reporting (AER) IEEE 802.3ae (10Gb/s Ethernet) IEEE 802.1q (VLAN) IEEE 802.1p (QoS/CoS) IEEE 802.3ad (Link Aggregation) IEEE 802.3x (Flow Control) PHP hot plug-hot swap Enhanced Error Handing (EEH) |
| Ports & slots | |
| Interface type | PCIe Express 2.0 x8 |
| Connection types | 10GBASE-SR short wave lasers with LC type connector |
| Size & build | |
| Product dimensions | 6.6 in × 2.71 in Short, low-profile form factor card Standard bracket (low profile available) |
| Shipping weight | 0.34 kg |
| Package size | 241 × 159 × 44 mm |
| Environment & compliance | |
| Temperature range | 0 °C to 55 °C |
| Humidity range | 5 % ~ 95 % (Non-condensing) |
The card operates within a 0 °C to 55 °C temperature range and up to 95 % non-condensing humidity, with power management under the PCI Bus Power Management Interface rev. 1.2.
Each port uses 10GBASE-SR short-wave optics with LC connectors; you need multimode fibre patch cords and switch ports that support 10GBASE-SR.
The adapter complies with the PCI Express base spec 2.0 and fits an x8 slot; on a 1.1 system it will negotiate down to the lower link speed.
More in Ethernet Cards & NICs
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?