We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two short flat cables with 3-pin RGB connectors and a male-to-male adapter

EN-Labs

EN-Labs 5VRGBSPL1X4 2-pack 5V 3-pin RGB 4-way splitter 1 ft

SKU CH-R7Z8-PAE58

Two packs of 1 ft 5 V 3-pin AURA RGB splitters turn one motherboard header into four synchronous channels and include a male-to-male gender changer

  • Cable length1 ft (0.3 m)
  • Product typeRGB Cable
  • Overall length1 ft (0.3 m)
  • Key featuresExtend the rare RGB interface on your motherboard to four Al
  • Splits one 5 V header into four RGB channels
  • 1 ft female-to-female cables keep internal routing tidy
  • Includes male-to-male gender changer for header flexibility
  • Two-pack lets you expand lighting on multiple boards
  • Rated for 5 V AURA only — not 12 V systems

RGB splitter for 5 V AURA headers

This two-pack provides four female 3-pin connectors from a single motherboard 5 V AURA header. Each splitter is 1 foot long and includes a male-to-male gender changer for flexible routing. The cables are designed exclusively for 5 V 3-pin addressable RGB lighting.

Fits builds with limited RGB headers

The splitter plugs directly into the motherboard's 5 V 3-pin header and requires no external power supply. It frees up the single header so four LED strips or fans can be controlled synchronously through the board's lighting software. The 1-foot length suits compact routing inside small cases.

Handles up to four devices within power limits

The motherboard header typically supplies 5 V at 3 A for a total of 15 W, which the cable passes through without adding capacity. Connected lighting runs should stay under 3.3 ft per channel to avoid voltage drop. If devices appear dimmed, the header is overloaded and the number of connected items must be reduced.

5 V only — not for 12 V systems

This splitter does not work with 12 V 4-pin RGB headers and will not power non-addressable analogue strips. Builders needing 12 V compatibility or more than four channels per header must use a different solution. The arrow mark on each plug must align with the 5 V pin on the motherboard for correct operation.

How it compares

Measured against everything we stock in Motherboard Add-On Parts, at today’s prices. Recalculated every night.

Price $8.99
Cheaper than about 80% of the 242 comparable items (median $50.49).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameEN-Labs
Model name5VRGBSPL1 × 4
Product typeRGB Cable
Size & build
Overall length1 ft (0.3 m)
Cable length1 ft (0.3 m)

Questions about this item

How much power can the motherboard header deliver before the splitter hits its limit?

The motherboard RGB header typically supplies up to 5 V / 3 A, which is 15 W total for all connected devices.

Will the cable run hot or draw extra power when used continuously?

The splitter itself adds no extra power capacity; it only passes the motherboard's 5 V supply, so heat and draw stay within the header's 15 W limit.

What motherboard connector is required for this splitter to function?

A 5 V 3-pin AURA RGB header is required; the included male-to-male gender changer adapts the 1 ft female cable to that header.

More in Motherboard Add-On Parts

Similar items