We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black panel-mount USB 2.0 cable with 9-pin motherboard header to two USB-A female ports, 1.64FT

EN-Labs

EN-Labs MB9P22U250CM Panel Mount USB 2.0 Cable 9Pin to 2 USB A Female 1.64FT Black

SKU CH-DHKH-0P5MW

Panel-mount adapter splits one motherboard 9-pin USB 2.0 header into two internal Type-A ports with screw-on brackets and a 1.64 ft cable

  • Cable length1.64 ft / 50 cm
  • Apple compatibilityUSB 2.0 Specification
  • Product typeAdapter
  • DetailsThis USB adapter cable offers 1.64 ft in cable length, which
  • Key featuresConnect 2 internal USB USB 2.0 devices (internal card reader
  • Connect two internal USB devices directly to the motherboard header
  • 64 ft cable reduces strain on the 9-pin header for reliable operation
  • Two USB 2.0 Type-A female ports with mounting holes and screws for secure case installation
  • Data transfer up to 480 Mbps compliant with USB 2.0 specification
  • Clean internal routing avoids external cables and keeps the build tidy

Panel-mount USB 2.0 adapter

This cable converts a single motherboard 9-pin USB header into two panel-mounted Type-A female ports. It is intended for builders who need internal USB 2.0 connections for devices such as card readers or internal drives without running cables to the rear I/O. The 1.64FT length reduces strain on the header for a more reliable link.

Two internal ports from one header

The splitter provides two downstream USB 2.0 Type-A connectors, each supporting data rates up to 480Mbps. Both ports share the single header bandwidth, so simultaneous high-throughput transfers will contend for the same 480Mbps ceiling. The 50cm cable reaches most front-panel or drive-bay locations in standard chassis layouts.

Screw-mount brackets included

Each female header ships with mounting holes and screws so the ports can be secured to a case panel or bracket. This eliminates loose cables inside the chassis and keeps the installation tidy. No additional software or drivers are required beyond standard USB 2.0 support in the operating system.

How it compares

Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.

Price $6.99
Cheaper than about 93% of the 15,227 comparable items (median $14.99).

Specifications

Product
Brand nameEN-Labs
Model nameMB9P22U250CM
Product typeAdapter
Size & build
Cable length1.64 ft / 50 cm
Compatibility
Apple compatibilityUSB 2.0 Specification

Questions about this item

Will this 9-pin USB 2.0 header cable work with an older motherboard that only has USB 1.1 headers?

The adapter follows the USB 2.0 specification and is backward compatible with USB 1.1 headers, so it will function at the slower 1.1 speed when connected to legacy hardware.

How can I verify the cable is delivering the full 480Mbps data rate after installation?

Connect a USB 2.0 device such as an internal card reader, then check the reported connection speed in your operating system's device manager or run a file transfer test to confirm 480Mbps throughput.

Does the package include mounting screws for the two USB-A female ports, or do I need to buy them separately?

The USB female headers come with holes and screws for PC case installation, so no extra mounting hardware is required.

More in USB Cords & Extension Cables

Similar items