We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey USB 2.0 adapter cable with full-profile bracket and two Type A ports

EN-Labs

EN-Labs USB 2.0 10-pin to 2×Type A adapter, 30 cm, grey, full-profile bracket

SKU CH-QW5S-J674B

Adds two USB 2.0 Type-A ports to a rear panel using a motherboard 10-pin header with a full-profile bracket

  • Connection typeUSB 2.0 10pin to 2 x Type A female
  • Cable length1 ft (0.3 m)
  • Product typeAdapter
  • Product colorGray
  • Key featuresFeature 2 port USB 2.0 slot plate adapter converts the USB2.

Style 2 Port

  • Adds two rear USB-A ports from one internal 10-pin header
  • Full-profile PCI bracket secures the adapter to the case rear panel
  • 30 cm cable reaches the motherboard header without strain
  • USB 2.0 compliant for 480 Mbps data transfer
  • Single 10-pin header required, no extra internal connectors needed

EN-Labs USB 2.0 Header Adapter

This EN-Labs adapter converts a single motherboard USB 2.0 10-pin header into two external USB Type A female ports. It mounts to the rear of a PC case using the included full-profile PCI slot bracket. The 30 cm cable connects the internal header to the bracket-mounted ports. Data transfer speeds reach up to 480 Mbps under the USB 2.0 specification.

Builders adding rear USB ports

The adapter suits system builders or upgraders who have a spare internal USB 2.0 header and an open full-profile expansion slot at the back of the chassis. It provides two legacy USB-A connections for peripherals such as keyboards, mice, or flash drives. Builders whose cases only accept low-profile brackets cannot use this bracket. Users needing USB 3.0 or USB-C speeds must choose a different adapter.

Requires one 10-pin USB 2.0 header

The single specification that decides compatibility is the availability of one free 10-pin USB 2.0 header on the motherboard. Without that header the adapter cannot function. The 30 cm cable length determines how far the bracket can sit from the header location. Verify the header pinout matches the standard 10-pin layout before purchasing.

How it compares

Measured against everything we stock in USB Cords & Extension Cables, at today’s prices. Recalculated every night.

Price $4.99
Cheaper than about 95% of the 15,227 comparable items (median $14.99).

Specifications

Product
Brand nameEn-Labs
Product typeAdapter
Product colorGray
Ports & slots
Connection typeUSB 2.0 10pin to 2 x Type A female
Size & build
Cable length1 ft (0.3 m)

Other versions of this model

1 more in the same range

Questions about this item

Does the 10-pin header connector or the grey cable need periodic replacement?

The adapter has no moving parts and the 30 cm cable is fixed; no scheduled maintenance or replacement is required for the header or cable.

What limits sustained data throughput on the two Type A ports?

The USB 2.0 specification caps each port at 480 Mbps, so that bandwidth ceiling appears first under continuous load.

How much heat or noise does the bracket produce when the ports run all day?

The passive adapter draws only bus power, generates negligible heat and makes no audible noise during all-day operation.

More in USB Cords & Extension Cables

Similar items