DBTLAP E1033X12BYAP-26 9733 12V 1.20A 4pin centrifugal turbo blower cooling fan
- Cooler
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Thermally cools 15.6 inch laptops using Peltier effect with three 140 mm fans and adjustable carbon-steel stand
The ENHANCE LZ-D21 combines a carbon-steel stand with a detachable thermoelectric module that uses the Peltier effect to pull heat directly from the laptop base. Three 140 mm fans move air across the panel while the semiconductor surface can reach 46 F within seconds. The unit supports notebooks up to 15.6 inches and 20 lbs, and a 360-degree rotating base lets you orient the cooler toward the hottest zone.
Traditional pads rely only on airflow; this model adds active refrigeration so the contact surface becomes colder than ambient air. The jump is worth it when sustained workloads push CPU and GPU temperatures into throttling territory despite good internal cooling. Buyers who need silent operation at low loads should note the cooler runs below 20 dB at 5 W and under 30 dB at 20 W, but the thermoelectric module cannot be powered from a laptop USB port alone.
Place the stand, slide the cooler into one of three location holes, and lock it with the spring-loaded dampers that conform to curved chassis bottoms. The detachable design means you can remove the module for travel or desk space. What usually goes wrong: condensation forms on the cold panel in humid rooms or when the cooler idles, so wipe the surface before attaching it to avoid moisture transfer to the laptop.
Measured against everything we stock in Laptop Cooling Stands & Fans, at today’s prices. Recalculated every night.
| Product | |
|---|---|
| Brand name | ENHANCE |
| Model name | LZ-D21 |
| Part number | LZ-D21 |
| Accessory category | Cooler |
| Product color | Blue |
| Size & build | |
| Fan size | 140 mm Fan |
| Measurements | 14.33 in W × 12.83 in H × 9.06 in D |
| Fan quantity | 3 |
| In the box | |
| In the box | 1, false |
| More details | |
| Team affiliation | 1 Piece |
The stand holds laptops up to 15.6 inches and 20 lbs with non-slip rubber pads on the base and panel.
Align the cooler with one of the three stage location holes and press until it locks; four spring dampers then pull the panel against the laptop base.
Wipe the fan blades and vents whenever dust builds up, typically every few months, to keep noise below 30 dB at full power.
More in Laptop Cooling Stands & Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?