Ericson 2630-CW6P-AM L18-30R 30 A 120/208 V Three-Pole Locking Connector
Three-pole locking connector rated 30 A at 120/208 V AC with IP69K protection and antimicrobial housing
- Product typeElectrical Connectors
- 30 A rating supports heavy-duty three-phase loads
- IP69K housing resists high-pressure wash-down environments
- Antimicrobial thermoplastic elastomer reduces surface contamination
- L18-30R NEMA configuration ensures correct three-phase mating
- Screw terminals accept cable from .64 in to .93 in diameter
Ericson L18-30R Three-Phase Connector
The Ericson 2630-CW6P-AM is a straight-orientation locking connector rated for 30 A at 120/208V AC. It uses a NEMA L18-30R four-pole, four-wire configuration suited for three-phase industrial power distribution. The housing is yellow thermoplastic elastomer with an antimicrobial finish and a shrouded design for durability.
Suited for three-phase equipment up to 30 A
This connector fits industrial machinery and temporary power setups that require a secure, high-protection link. It accepts cable diameters from .64 in to .93 in using screw terminals. Installers needing a different NEMA arrangement, a higher current rating, or a non-shrouded body should select an alternative part.
IP69K ingress protection
The connector meets IP69K, meaning it withstands close-range high-pressure, high-temperature washdown. This rating is the deciding factor for food-processing, pharmaceutical, and heavy-industrial environments where sanitation cycles are mandatory.
How it compares
Measured against everything we stock in Electrical Enclosures & Cabinets, at today’s prices. Recalculated every night.
- Price $98.99
- Pricier than about 75% of the 1,411 comparable items (median $39.99).
Specifications
| Product | |
|---|---|
| Brand name | Ericson |
| Product type | Electrical Connectors |
Questions about this item
What cable diameter range does the Ericson 2630-CW6P-AM connector accept?
The connector fits cables from .64 in to .93 in outer diameter, matching the screw-terminal wiring chamber.
How do you install the locking connector, and which step is often missed?
Strip each conductor, insert into the four screw terminals, tighten to spec, then engage the shrouded locking collar until it clicks — the collar click is the step installers skip.
When should the antimicrobial thermoplastic housing be inspected or replaced?
Inspect the yellow IP69K housing after heavy wash-down cycles; replace if the antimicrobial surface shows cracking, discoloration, or the lock collar no longer latches securely.
More in Electrical Enclosures & Cabinets
Similar items
VEVOR TIP-640 Fiberglass Electrical Box IP66 60 x 40 x 23 cm
- Other Appliances
IFM Efector Inc KI5207 Capacitive Cylindrical Proximity Sensor 30 mm PBT 2 m Bare electrical box
- Industrial Electric…





