We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver annular HSS cutter with pilot pin, 2 inch diameter and depth

Evolution Power Tools

Evolution Power Tools CC200L 2" Annular HSS Cutter with Pilot

SKU CH-TTMV-QE31V

A 2-inch diameter annular HSS cutter with pilot creates finished, burr-free holes in magnetic drills

  • Cuts only the hole periphery saving drilling time
  • Produces reamed burr-free holes without secondary finishing
  • High-speed steel construction resists wear during heavy use
  • Supplied with pilot pin for accurate hole alignment
  • California Proposition 65 warning applies to this product

2" Annular HSS Cutter

The Evolution Power Tools CC200L is a 2 inch diameter annular cutter designed for magnetic drills. It removes only the perimeter of the hole to deliver a reamed, burr-free finish faster than a twist drill. Professional metalworkers and maintenance crews use it to cut clean 2 inch deep holes in structural steel and plate.

Cutting depth limit

The cutter achieves a maximum cutting depth of 2 inches, which defines the thickest material it can penetrate in a single pass. Workpieces thicker than this require multiple operations or a longer cutter. The pilot pin supplied with the cutter must engage the workpiece to eject the slug, so through-holes are necessary for proper operation.

Replaces twist drilling

This annular cutter replaces twist drills for holes of this diameter, cutting up to three times faster while using less power and producing a finished hole without secondary reaming. The step up is worthwhile when repeat accuracy and reduced tool wear matter on high-volume structural jobs. It is not suited for blind holes or non-magnetic materials where a magnetic drill cannot hold.

How it compares

Measured against everything we stock in Bits, Hole Saws & Accessory Kits, at today’s prices. Recalculated every night.

Price $137.99
Pricier than about 90% of the 5,493 comparable items (median $27.99).

Specifications

Product
Brand nameEVOLUTION POWER TOOLS

Questions about this item

Should I choose the 2 inch diameter or a different size cutter?

The CC200L is a 2 inch diameter cutter with 2 inch depth of cut. Select this size when the hole you need matches those dimensions; other diameters are separate part numbers.

What does the 2 inch depth of cut mean when the cutter is in the magnetic drill?

It means the tool can produce a through-hole up to 2 inches deep in a single pass, leaving a reamed, burr-free finish without the thrust required by a twist drill.

What shank interface does this annular cutter use and what does it limit?

The cutter fits Evolution magnetic drills with a standard 3/4 inch Weldon shank, so the maximum diameter and depth are capped by the drill’s stroke and chuck capacity.

More in Bits, Hole Saws & Accessory Kits

Similar items