Fans 2406KL-04W-B36 case fan 60x60x15mm 12V 0.14A 1500rpm 12dBA 30.3CFM
A 60 mm ball-bearing case fan moves 30.3 CFM at 1500 rpm while producing only 12 dBA
- Quiet operation at 12dBA for silent builds
- 1500 rpm delivers 30.3 CFM airflow
- Ball bearing ensures long service life
- Runs on 12V drawing only 0.14A
- Compact 60x60x15mm fits tight spaces
Compact 60 mm Axial Fan
The 60 by 60 by 15 millimetre fan runs on 12 volts and draws 0.14 amps while spinning at 1500 rpm with a tolerance of plus or minus ten percent. It delivers 30.3 CFM of airflow at a rated noise level of 12 dBA making it suitable for tight enclosures that need quiet cooling.
Ball Bearing with Wide Voltage Range
A ball bearing supports the rotor for consistent rotation and longer service life in continuous operation. The operating voltage window spans 4.5 to 13.8 volts so the fan can be undervolted for silence or run at full rated speed without a separate controller.
Replaces 60 mm Sleeve Bearing Units
Builders swapping out worn sleeve bearing fans gain a more durable bearing and a lower noise floor at the same mounting footprint. The upgrade is worthwhile when the existing fan has become audible or when the system demands the wider input voltage range for variable speed control.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $30.99
- Pricier than about 76% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does the 3-pin connector on the 2406KL-04W-B36 support PWM speed control?
The 2406KL-04W-B36 uses a 3-pin connector that provides voltage-based speed control and tachometer feedback; it does not accept a 4-pin PWM signal.
Will the 60 mm by 60 mm by 15 mm frame fit a standard 60 mm fan mount?
Yes, the 60 x 60 x 15 mm dimensions match the standard 60 mm mounting pattern with 50 mm screw-hole spacing.
How do I connect the three wires correctly so the fan reports speed to the motherboard?
Connect the yellow wire to the motherboard fan header tach pin; reversing the red and black power wires will prevent the fan from spinning.
More in PC Cooling Fans
Similar items
be quiet! BL118 Silent Wings Pro 4 120mm PWM White case fan
- 120 mm
- 1 Fan
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
ASUS Prime MR120 ARGB 28mm 120mm Case Fan 3-Pack Black
- 3 Fans
- No Controller





