Fans 4314/17TMotor case fan 24V 4.8W 2800 RPM 120x120x38mm
24 V DC axial fan with speed alarm and optional NTC sensor, 4.8 W at 2800 RPM in a 120×120×38 mm PBT housing rated for 65,000 hours L10 life
- Robust PBT housing and PA impeller resist vibration
- 8 W at 24 V draws only 0.2 A current
- 2800 RPM airflow cools dense 120 × 120 × 38 mm enclosures
- Speed alarm signals low-signal fault when RPM target missed
- 65000-hour L10 ball-bearing life reduces replacement cycles
Compact 120 mm DC axial fan
This 120 x 120 x 38 mm axial fan from the 4314 series runs on 24 V DC and draws 0.2 A at 4.8 W. It spins at 2800 RPM using a maintenance-free ball bearing system housed in glass-reinforced PBT with a glass-reinforced PA impeller. An integrated speed alarm emits a continuous high signal during normal operation and a low signal if the set speed is not reached. Rated life expectancy reaches 65000 hours at L10.
Suited for fixed-speed 24 V cooling in enclosures
The fan suits builders who need a robust, fixed-speed 24 V DC axial fan with integrated speed monitoring for electrical cabinets or enclosures. Its clockwise exhaust orientation and IP20 rating fit standard panel-mount cutouts. Buyers who require PWM speed control, a different operating voltage, or a thinner frame should consider other options.
Single-rail 24 V power requirement
Operation requires a stable 24 V DC supply capable of delivering at least 0.2 A. The two-wire plus alarm connector does not support PWM or voltage regulation, so the fan always runs at full 2800 RPM when powered.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $43.99
- Pricier than about 86% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Does this fan need a 24 V DC power source to run?
Yes, it requires a 24 V DC supply and draws 0.2 A for its 4.8 W rating.
Can I use the speed alarm output with a motherboard fan header that expects a tachometer signal?
The alarm outputs a continuous high signal at normal speed and drops low if the fan falls below the set threshold, so it can serve as a speed monitor.
How do I confirm the fan is spinning at the rated 2800 RPM once installed?
The built-in alarm signal stays high while the fan runs at the correct speed; a low signal means the target RPM is not being reached.
More in PC Cooling Fans
Similar items
Thermaltake CT120 EX ARGB Sync 120mm White 3-Fan Pack CL-F190-PL12SW-A
- 120 mm
- ARGB
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
SXDOOL 120mm Rainbow Iridescence Case Fan 6 Pack 3Pin+Molex
- Hydraulic
- <1,600 RPM
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





