We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square black plastic axial fan 60 by 60 by 25mm with Molex connector and brass threaded corner inserts

Fans

Fans 614NGHH 60x60x25mm 24V DC Case Fan 5100rpm

SKU CH-4PHJ-M79GH

A 60 x 60 x 25 mm DC case fan delivering 40 m³/h airflow at 5100 rpm with a 35 dB(A) noise level

  • 24 V DC operation for efficient power use
  • 5100 rpm speed delivers 40 m³/h airflow
  • 35 dB(A) noise level keeps systems quiet
  • 313 mm lead with Molex 22-01-2025 connector simplifies wiring
  • M3 threaded brass inserts on both sides enable secure mounting

Compact 60 mm DC fan for targeted airflow

The 60 x 60 x 25.4 mm frame fits tight chassis and industrial enclosures where a 24 V DC supply is available. It delivers 40 m³/h at 5100 rpm while drawing only 2.1 W and 88 mA. The sleeve bearing keeps acoustic output at 35 dB(A). Brass threaded inserts on both sides accept M3 bolts for secure mounting.

Molex 22-01-2025 connector replaces hard-wired leads

The factory-fitted Molex plug removes the need for soldering or crimping when swapping out older wired fans. A 313 mm lead provides routing slack without excess cable bulk. The upgrade is worthwhile when maintenance speed matters and the system already uses 24 V DC distribution. IP20 protection and a fused bracket add baseline safety for continuous operation.

40 m³/h suits component-level cooling.

At this flow rate the fan comfortably handles VRM heatsinks, GPU backplates or small-form-factor PSU exhaust. It runs out of headroom when tasked with moving air through dense radiator stacks or high-static-pressure filters. The 600 N series design prioritises compact forced-air cooling over high-volume case circulation. Buyers needing greater static pressure or larger airflow volumes should look elsewhere.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $20.99
Typical for this category: the median of 8,339 items is $19.99.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

What mounting hardware fits the 60 x 60 x 25.4 mm frame and the brass threaded inserts?

The housing has brass threaded inserts on both sides that accept M3 threaded bolts for secure mounting.

Which connector does the 313 mm lead terminate in, and how is it keyed for the 24 V supply?

The lead ends in a Molex 22-01-2025 connector; plug it into a 24 V DC header observing the keyed orientation to avoid reversed polarity.

When should the sleeve bearing be checked or the fan replaced given the 35 dB(A) noise rating at 5100 rpm?

Monitor for increased noise or vibration above the rated 35 dB(A); sleeve bearings typically need replacement when audible rumble appears or airflow drops below 40 m³/h.

More in PC Cooling Fans

Similar items