Fans
Fans MGT4012UB-R20 4020 12V 0.30A 4cm industrial cooling fan 100 pcs
$418.99
0.00511294BTC
In stock
Fans 6SY7010-7AA02 Siemens converter fan 280mm 230VAC 890W
A 280 mm centrifugal fan delivering 2565 m³/h at 230 VAC with 890 W input and 81 dB(A) noise
- High airflow 2565 m3/h for efficient cooling
- 890 W input power handles demanding converter loads
- IP10 protection and galvanised steel construction resist industrial wear
- 30 000 hour L10 life at 40 °C reduces replacement frequency
- 230 VAC single-phase supply fits standard industrial power
Siemens 6SY7010-7AA02 converter fan
The 6SY7010-7AA02 is an industrial centrifugal fan built for Siemens converter cooling. It runs on 230 VAC single-phase power with a voltage range of AC 190 to 245 V at 60 Hz. The galvanised-steel impeller measures 280 mm and is driven by an external-rotor motor rated at 890 W input power.
Suited for converter retrofit and maintenance
Engineers servicing existing Siemens drive cabinets will match the original airflow of 2 565 m³/h and static pressure up to 850 Pa. The IP10 protection level and 81 dB(A) noise index make it unsuitable for wash-down environments or noise-sensitive offices. Buyers who need higher ingress protection or quieter operation should look at alternative designs.
Fits standard converter ducting
The unit weighs 7.2 kg and connects via a TR64 plug with 400 mm flying leads, simplifying wiring inside the enclosure. A 12.0 µF / 450 V start capacitor is required for single-phase starting. Operating temperature spans -20 °C to +60 °C, and L10 life expectancy reaches 30 000 hours at 40 °C, reducing scheduled replacement intervals.
How it compares
Measured against everything we stock in Industrial, Drum & Tower Cooling Fans, at today’s prices. Recalculated every night.
- Price $329.99
- Typical for this category: the median of 304 items is $325.49.
Specifications
No published specifications for this item yet.
Questions about this item
What power supply is required for the 230VAC 890W motor?
The fan runs on single-phase 230VAC within a 190V to 245V range and draws 3.9 A at 890W input power.
Can the 280mm impeller and 2565 m3/h airflow replace an older 2740 rpm unit?
Yes, the motor speed is 2740 rpm at 60 Hz and the 280mm impeller delivers 2565 m3/h with wind pressure up to 850 Pa.
How do I confirm the fan is operating correctly after wiring the TR64 plug?
Verify the motor reaches 2740 rpm, airflow hits 2565 m3/h, noise stays near 81 dB(A) and the housing remains within the -20°C to 60°C range.
More in Industrial, Drum & Tower Cooling Fans
