Fans AD0912UX-A7BGLSize 92mm 12V 0.50A 3300rpm case fan
A 92 mm PWM case fan spinning at 3300 rpm with 56.62 CFM airflow and ADDA HYPRO bearing
- 12 V PWM control adjusts speed to thermal load
- HYPRO bearing reduces friction for longer service life
- 3300 rpm delivers 56.62 CFM airflow at full speed
- 92 mm square frame fits standard case mounts
- 50 A draw keeps power consumption low
92 mm PWM case fan
This 92 mm axial fan runs on 12 V and draws 0.50 A for 6 W of power. The ADDA HYPRO bearing supports a maximum speed of 3300 rpm at full voltage. A four-wire PWM lead connects directly to a motherboard header for automatic speed control. It fits standard 92 mm mounting holes with a 25 mm frame depth.
Suited for 92 mm mounts needing PWM control
Builders with 92 mm case or heatsink mounts who want motherboard-regulated speed will find this a direct fit. Systems that require a different frame size or a three-pin voltage-controlled header cannot use this fan without adapters. Buyers needing higher static pressure or lower noise profiles should evaluate other models.
3300 rpm at 12 V full speed
The fan reaches 3300 rpm when fed the full 12 V, delivering 56.62 CFM of airflow at that setting. This single speed figure determines whether the cooling capacity matches the thermal load of the target component. Lower PWM duty cycles will reduce both speed and airflow proportionally.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $12.99
- Cheaper than about 80% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the 4-pin PWM connector control on this 12 V fan?
The 4-pin PWM connector lets the motherboard vary the fan speed up to 3300 rpm while the 12 V supply delivers up to 0.50 A.
Will the 92 mm × 25 mm frame fit a standard 92 mm mounting pattern?
Yes, the 92 mm square frame and 25 mm thickness match the common 92 mm case-fan mounting holes.
How do I connect the 4-pin lead so PWM control actually works?
Plug the 4-pin connector into a motherboard PWM header; using a 3-pin header or voltage-only adapter will disable speed control.
More in PC Cooling Fans
Similar items
COUGAR CF-V12HB 120mm case fan 1200 RPM 60.4 CFM Hydro Dynamic
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Thermaltake Pure 20 CL-F015-PL20BL-A 200mm case fan
- 1 Fan
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





