Fans AFB0812SH F00 12V 0.51A 8025 Double Ball Case Fan
An 80 mm DC axial fan delivering 46.62 CFM airflow at 4000 RPM with double ball bearings and a 15 cm 3-pin lead
- Delivers 46.62 CFM airflow for efficient cooling
- Runs at 4000 RPM within 7.0V to 13.8V range
- Double ball bearing motor ensures long-lasting reliability
- Draws only 4.08 W at 0.51 A nominal current
- Compact 80x80x25.4 mm frame fits tight spaces
80 mm DC axial fan for tight builds
This 80 mm DC axial fan fits the standard 8025 frame and runs on a 12 V supply with a 0.51 A nominal draw. It suits compact cases, rack units or appliance upgrades where a 4000 R.P.M. airflow of 46.62 CFM is required. The 3-pin 2510 connector and 15 cm lead simplify wiring in restricted spaces.
Double-ball bearing and wide voltage range
Double-ball bearings extend service life compared with sleeve alternatives and tolerate mounting in any orientation. The motor accepts 7.0 V to 13.8 V, so speed can be lowered for quieter operation or raised to the rated 40.0 dB-A level when maximum cooling is needed. Input power stays at 4.08 W across the range.
Replaces worn 80 mm case fans in legacy gear
The fan directly substitutes older 80 mm units that have become noisy or failed, restoring original airflow without redesigning the chassis. It is not suited for builds that demand larger-frame fans, PWM control or higher static pressure than the rated 6.78 mmH2O. The 100 % speed rating confirms consistent output at nominal voltage.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $25.99
- Pricier than about 65% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What connector does the AFB0812SH F00 use and what does the 3-pin layout limit?
It uses a 3-pin 2510 terminal plug; the third pin carries a tachometer signal but the fan runs at a fixed voltage, so speed control must come from the motherboard or a fan controller.
What are the exact mounting dimensions for this 8025 fan?
The frame measures 80 mm by 80 mm by 25.4 mm; the screw-hole pattern follows the standard 80 mm square pitch used on most cases and radiators.
How do you install the 15 cm lead without stretching it?
Route the 15 cm cable before securing the fan with four M3 screws; a common mistake is mounting the fan first and then finding the plug cannot reach the header.
More in PC Cooling Fans
Similar items
Noctua NF-A14 iPPC-3000 PWM 140mm case fan 3000 RPM
- 1 Fan
- No Controller
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
1ST PC CORP. FFB1212EH-PWM 120mm 25mm 4000 RPM 150.33 CFM 56.4 dBA 4-pin PWM case fan
- 25 mm
- 2 Ball
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Noctua NF-S12B redux-1200 PWM 120mm 1200 RPM 4-pin case fan
- 120 × 120 × 25 mm
- 1 Fan





