We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square centrifugal blower fan with wire leads, 97 by 94 by 33 mm

Fans

Fans BFB1012MLead 12V .60A 2600 RPM 25.43 CFM case fan

SKU CH-XCE3-K4MT0 MPN BFB1012MLead

A 97 mm square centrifugal blower moves 25.43 CFM at 2600 RPM with 30 dBA noise

  • Compact 97×94×33 mm size fits tight chassis spaces
  • 2600 RPM ball-bearing motor delivers 25.43 CFM airflow
  • 30 dBA noise keeps system acoustics low
  • 12 V 0.60 A draw limits power to 9.6 W
  • 0–13.8 V range tolerates voltage variance

97×94 mm axial blower

The Delta BFB1012MLead is a 12 V axial fan with a 97 by 94 mm frame and 33 mm depth. It draws 0.60 A at 9.6 W and spins at 2600 RPM to deliver 25.43 CFM airflow at 1.00 in H₂O static pressure. Noise is rated at 30 dBA using a high-precision ball bearing.

Suited for tight exhaust paths

Builders needing focused exhaust through restrictive heatsinks or narrow ducts will benefit from the high static pressure and compact frame. Systems that require high-volume airflow across open mesh or large radiators should consider larger fans instead.

1.00 in H₂O static pressure

The 1.00 in H₂O pressure rating is the key figure that determines whether this blower can push air through dense fin stacks or long ducts. If the installation has minimal resistance, a higher-flow, lower-pressure fan would move more air overall.

How it compares

Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.

Price $28.99
Pricier than about 72% of the 8,339 comparable items (median $19.99).

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

How do I install this 97 mm by 94 mm blower with the 3-pin lead and what step do people miss?

Mount it using the 33 mm depth clearance, connect the 3-pin lead to a 12 V header, and verify the operating range of 4.0-13.8 V so the fan actually starts.

What maintenance will this 0.60 A ball-bearing fan need later?

The high-precision ball bearing is sealed; no lubrication is required, but clean dust from the 97x94 mm intake every few months to keep airflow at 25.43 CFM.

What limit appears first when this 2600 RPM blower runs continuously?

Sustained operation at 9.6 W input and 1.00 IN H2O pressure will hit the 30 dBA noise ceiling before thermal limits are reached.

More in PC Cooling Fans

Similar items