Fans DS07015R12L 70 mm 12 V 0.30 A 4-pin case fan
70 mm 12 V case fan with hydraulic bearing and 4-pin PWM control running 1000 to 3200 rpm
- Hydraulic bearing reduces friction and noise
- 4-pin PWM enables precise speed control 1000 to 3200 rpm
- 70 mm frame fits tight chassis spaces
- 12 V 0.30 A draws minimal power
- 5 cm lead reaches most motherboard headers
70 mm 4-pin case fan
The AVC DS07015R12L is a 70 mm square frame fan designed for chassis ventilation. It operates on 12 V power and draws 0.30 A through a standard 4-pin connector. The hydraulic bearing aims to balance noise and service life in compact builds.
1000 to 3200 rpm speed range
Rotational speed spans 1000 to 3200 rpm with a ±5 % tolerance, allowing the motherboard to scale airflow with thermal load. Mounting holes are spaced 61.5 mm apart, matching the common 7015 footprint. The 21.5 cm lead reaches most fan headers without extension cables.
Suits small-form-factor repairs and OEM replacements
Builders fitting a 70 mm intake or exhaust slot in a tight enclosure will find the dimensions and pin-out compatible. Users needing larger airflow volumes, alternative bearing types or different voltage rails should consider other sizes.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $28.99
- Pricier than about 72% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
What does the 3200 rpm top speed mean for airflow inside my case?
The fan spins between 1000 and 3200 rpm, so it can move a moderate amount of air at low noise when idling and ramp up for heavier loads.
How does the 4-pin connector control the fan in practice?
The 4-pin PWM header lets the motherboard vary voltage to hit any speed between 1000 and 3200 rpm and reports the actual speed back to the system.
Will the 61.5 mm mounting holes line up with standard 70 mm fan positions?
Yes — the hole spacing is 61.5 mm, which matches the common 70 mm square mounting pattern used on most cases and radiators.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Noctua NF-F12 iPPC-2000 IP67 120mm 2000 RPM case fan
- 120 × 120 × 25 mm
- 1 Fan
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Fractal Design Dynamic X2 DYN-X2-GP18-PWM-BK 180 mm 38 mm case fan
- 1 Fan
- No Controller





