Fans M2D068-CFMotor Case Fan 400V 89W 2750 RPM
Axial fan moves up to 35000 m³/h at 2750 RPM using 89 W from 400 V supply
- High airflow capacity supported by 35000 m³/h rating
- Industrial-grade reliability from ebmpapst German engineering
- Efficient operation at 89W power consumption
- Precise speed control via 100% analog or serial interface
- Compact axial design suits space-constrained installations
Industrial Axial Fan
The Fans M2D068-CFMotor is an ebmpapst axial fan built for forced electronic cooling in industrial equipment. It serves engineers maintaining Siemens servo spindle systems or similar 400 V environments. The compact external-rotor design fits tight enclosures while delivering high airflow.
35000 m³/h Airflow at 2750 RPM
At 400 V and 89 W the fan moves up to 35000 m³/h, providing strong headroom for heat-exchanger duty and dense component cooling. Speed drops below 2750 RPM when load increases or voltage sags, reducing airflow accordingly. The 0.26 A draw leaves margin on typical 400 V supply circuits.
100 % Speed Control via Analog or Serial Interface
The integrated EC electronics accept 0–10 V or PWM signals and serial commands for full 0–100 % speed regulation. No separate controller is required; the fan starts and runs directly from the matched motor electronics. Buyers needing fixed-speed operation or a different control voltage cannot use this model.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $280.99
- Pricier than about 90% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
Will the 400 V axial fan run alongside the 68 W power supply already in my Siemens cabinet?
The fan draws 89 W at 400 V and 0.26 A, so the existing 68 W supply would be undersized; a supply rated for at least 100 W on the 400 V rail is needed.
How do I verify the fan is operating at the specified 2750 RPM after installation?
Connect the fan to its 400 V feed and measure speed with a tachometer or the servo drive’s feedback; it should read 2750 r/min when the GreenTech EC control signals full speed.
Does the M2D068-CFMotor ship with mounting brackets, power cable or a GreenTech EC controller, or must I source them separately?
The box contains the axial fan unit only; mounting hardware, 400 V power cable and any analog or serial speed-control interface are not included and must be purchased separately.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Zyvpee R2E220-AA40-05 230V AC Centrifugal Case Fan
- 2 Ball
- 2500-2,999 RPM





