Fans MRS20-TULSize 200V 0.5A 15-20 CFM case fan
200V axial fan delivers 15-20 CFM airflow at 60-61 dBA for industrial cooling applications
- Airflow rate15-20 CFM
- Moves 15-20 CFM for steady component cooling
- Runs on 200-230 V single-phase mains power
- Draws only 75-95 W at 0.4-0.5 A
- Spins at 3350-3400 RPM with 221-265 Pa static pressure
- Operates at 60-61 dBA for quiet operation
Industrial axial cooling fan
The ORIX MRS20-TUL is a 200 mm square axial fan built for equipment that needs steady airflow in a shallow mounting depth. It runs on single-phase 200-230 V mains power and draws 0.4-0.5 A depending on line voltage. The unit suits industrial, medical, rail and commercial installations where space-saving air exchange is required.
15-20 CFM airflow with 221-265 Pa static pressure
At 3350-3400 RPM the fan delivers 13.2-15.5 m³/min of air volume, equivalent to 15-20 CFM. Maximum static pressure reaches 221-265 Pa, letting it push air through restrictive heat exchangers or dense filter meshes. Acoustic output sits at 60-61 dBA, which is audible in quiet offices but typical for industrial environments. Power draw is 75-95 W.
90 mm mounting depth for tight enclosures
The 90 mm frame depth allows the fan to fit inside compact cabinets, drive enclosures or rack shelves where deeper blowers cannot. Standard 200 mm square bolt pattern aligns with common cut-outs in sheet-metal panels. Mains-voltage operation removes the need for an external DC supply or transformer. The design is not suited for low-noise desktop PCs or battery-powered devices.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $294.99
- Pricier than about 90% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Performance | |
|---|---|
| Airflow rate | 15-20 CFM |
Questions about this item
Will this 200 V fan run on the same circuit as my existing 230 V equipment?
The motor is rated for single-phase 200 / 230 V input, so it can share a 230 V supply with your current gear.
How do I confirm the fan is spinning at the correct speed after installation?
Listen for 60–61 dBA noise and expect 3350–3400 RPM at 200 V / 230 V respectively.
Does the box include mounting screws or a power cable?
Only the axial fan unit is supplied; fixings and a 200 V mains lead must be sourced separately.
More in PC Cooling Fans
Similar items
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan





