Fans RLF35-8/12N 5015 51x51x15mm 12V 9.6m3/h 6700rpm 55dB Blower Case Fan
A 12 V DC centrifugal blower measuring 51 x 51 x 15 mm, delivering 9.6 m³/h at 6700 rpm with 55 dB noise and ball-bearing reliability
- 12 V DC centrifugal blower delivers 9.6 m³/h airflow
- 6700 rpm radial flow reaches 55 dB noise level
- Ball-bearing motor with electronic reverse-polarity and locked-rotor protection
- 51 × 51 × 15 mm frame fits 43 × 38 mm mounting holes
- Fibreglass-reinforced plastic impeller on steel base for long service life
Compact blower for tight enclosures
The Fans RLF35-8/12N is a 51 x 51 x 15 mm centrifugal blower that runs on 12 V DC. Its 5015 form factor targets builders who need directed airflow in small chassis or industrial housings where axial fans cannot fit.
Ball-bearing motor with steel base
A fiberglass-reinforced plastic impeller sits on a steel shell base for durability. The electronically commutated outer-rotor motor includes reverse-polarity, locked-rotor and overload protection. Two stripped and tinned AWG22 leads provide the electrical connection, while mounting holes spaced 43 x 38 mm allow secure fastening.
Speed control and high static pressure
The blower delivers 9.6 m3/h at 6700 rpm with a noise level of 55 dB. The manufacturer states the series supports 100 % speed control via analog or serial interfaces, enabling precise thermal management. Buyers who need higher volume airflow above 35000 m3/h or larger frame sizes should consider alternative models.
How it compares
Measured against everything we stock in PC Cooling Fans, at today’s prices. Recalculated every night.
- Price $24.99
- Pricier than about 63% of the 8,339 comparable items (median $19.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
No published specifications for this item yet.
Questions about this item
How does the 12 V DC blower connect to power?
It uses two stripped and tinned AWG22 TR64 terminal leads for direct wiring.
What are the exact mounting hole dimensions for the 51 x 51 mm frame?
The holes are spaced 43 mm vertically and 38 mm horizontally.
How do I control the speed on this electronically rectified motor?
The fan supports 100 % speed control via an analog or serial interface.
More in PC Cooling Fans
Similar items
Noctua NF-A14 iPPC-2000 PWM 140mm 2000 RPM case fan
- 140 × 140 × 25 mm
- 1 Fan
Phanteks PH-F140M25R_G2_DBK01_3P 140mm case fan 3-pack
- 3 Fans
- No Controller
BGears b-BlasterPWM 120x38 case fan 38mm 1300-6500 RPM 318 CFM
- 1 Fan
- Case Fan
Lian Li 14RSLIN1B 140 mm case fan, black, ARGB, 1600 rpm, 72.7 CFM, 28 dBA
- 140 mm
- 1 Fan
Antec NOVA 120 120mm case fan fluid dynamic bearing 4-pin PWM
- 120 mm
- 1 Fan





